Indesit PRO 95 GT.01 S Bedienungsanleitung PDF herunterladen (Seite 11)

Before connecting the appliance to the power supply, make

sure that:

 

the law.

    

appliance, which is indicated by the data plate.

 

on the data plate.

 

If the socket is incompatible with the plug, ask an

authorised technician to replace it. Do not use extension

cords or multiple sockets.

! Once the appliance has been installed, the power supply

cable and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only.

! The manufacturer declines any liability should these

safety measures not be observed.

Important: the wires in the mains lead are coloured in

accordance with the following code:

Green & Yellow - Earth

Blue - Neutral

Brown - Live

As the colours of the wires in the mains lead may not

correspond with the coloured markings identifying the

terminals in your plug, proceed as follows:

Connect the Green & Yellow wire to terminal marked “E”

or or coloured Green or Green & Yellow.

Connect the Brown wire to the terminal marked “L” or

coloured Red.

Connect the Blue wire to the terminal marked “N” or

coloured Black.

FAILURE TO OBSERVE THE ACCIDENT-PREVENTION

REGULATIONS RELIEVES THE MANUFACTURER OF

ALL LIABILITY.

Replacing the cable

Use a rubber cable of the type H05VV-F with a cross section

of 3 x 1.5 mm². The yellow-green earth wire must be 2 ÷ 3

cm longer than the other wires.

Gas connection

Connection to the gas network or to the gas cylinder may be



with current national legislation and after making sure that the

appliance is suited to the type of gas with which it will be supplied

(see the rating sticker on the cover: if this is not the case see

below). When using liquid gas from a cylinder, install a pressure

regulator which complies with current national regulations.

! Make sure that the gas supply pressure is consistent

with the values indicated in the Table of burner and nozzle

specifications (see below). This will ensure the safe

operation and durability of your appliance while maintaining





Make sure that the hose complies with current national

legislation. The internal diameter of the hose must measure: 8



Once the connection has been performed, make sure that

the hose:

 

temperatures of over 50°C.

 

is not kinked or bent.

 

or moving parts and that it is not compressed.

       

condition may be checked.

 

 

using clamps which comply with current regulations.

!

cooker must be installed according to the conditions listed

for class 2 - subclass 1 appliances (installed between two



(see below).



a threaded attachment

Make sure that the hose and gaskets comply with current

national legislation.

To begin using the hose, remove the hose holder on

the appliance (the gas supply inlet on the appliance is a

cylindrical threaded 1/2 gas male attachment).

! Perform the connection in such a way that the hose length

does not exceed a maximum of 2 metres, making sure that

the hose is not compressed and does not come into contact

with moving parts.

Checking the connection for leaks

When the installation process is complete, check the hose



Adapting to different types of gas

It is possible to adapt the appliance to a type of gas other

than the default type (this is indicated on the rating label

on the cover).

Adapting the hob

Replacing the nozzles for the hob

burners:

1. Remove the hob grids and slide

the burners off their seats.

2. Unscrew the nozzles using a 7



replace them with nozzles suited to

the new type of gas (see Burner and



3. Replace all the components by following the above

instructions in reverse.

Adjusting the hob burners’ minimum setting:

1. Turn the tap to the minimum position.

2. Remove the knob and adjust the regulatory screw, which

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit PRO 95 GT.01 S Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mikrowellen Indesit PRO 95 GT.01 S