Indesit SCHO 103E P (BK) Bedienungsanleitung PDF herunterladen (Seite 30)

3. Secure the two frames with the

guide rails using the holes provided

on the oven walls (see diagram).

The holes for the left frame are

situated at the top, while the holes

for the right frame are at the bottom.

4. Finally, fit the frames on the

spacers A.

! Do not place the sliding racks in position 5.

Automatic cleaning with the FAST CLEAN function

With the FAST CLEAN mode, the internal temperature of the oven reaches

500°C. The pyrolytic cycle is activated, burning away food and grime

residues. Dirt is literally incinerated.

Keep children away from the appliance during the automatic cleaning cycle

as surfaces may become very hot. Particles may ignite inside the oven as a

result of the combustion process. There is no cause for concern: this process

is both normal and hazard-free.

Before initiating the FAST CLEAN mode:

• clean the oven door;

• remove large or coarse food residues from the inside of the oven using a

damp sponge. Do not use detergents;

• remove all accessories and the sliding rack kit (where present);

• do not place tea towels or pot holders over the oven handle.

! If the oven is too hot, the pyrolytic cycle may not start. Wait for the oven to

cool down.

! The programme may only be started once the oven door has been closed.

To activate the Fast Clean programme:

1. Switch the control panel on by pressing the button.

2. Press the button; the TIME display will show the default duration of

1:30 h (normal cycle), while he TEMPERATURE display will show “Piro” and

“nor” alternately;

3. The desired cleaning level can be selected by pressing the button, then:

- pressing “ ” to switch to the intensive cycle: the duration is 2 h and the

TEMPERATURE display shows the text “Piro” and “int” alternately;

- pressing “ ” to switch to the economy cycle: the duration is 1 h and the

TEMPERATURE display shows the text “Piro” and “eco” alternately.

Safety devices

• the door locks automatically as soon as the temperature reaches a high

value; the icon lights up on the display;

• pressing the button cancels the cleaning cycle t any time;

• if a malfunction occurs, the heating elements will be switched off;

• once the oven door has been locked, you cannot change the duration and

end time settings.

Programming delayed automatic cleaning

! Programming is possible only after selecting the FAST CLEAN mode.

1. Press the button and set the end time using the “ ” and “ ” buttons.

2. Once you have reached the desired end time, press the button again.

3. Press the button to activate the programmed mode.

4. When the selected time has elapsed, “END” appears on the TEMPERATURE

display and a buzzer sounds.

• For example: it is 9:00 a.m. and the Economy (ECO) FAST CLEAN level

has been selected, with the default duration of 1 hour. 12:30 is scheduled

as the end time. The programme will start automatically at 11:30 a.m.

The icons and ash to indicate that programming has taken place.

After programming, in the time before the Fast Clean mode starts, the TIME

display indicates the duration and end of the Fast Clean mode alternately.

To cancel programming press the button.

Once the automatic cleaning cycle is over

Before you can open the oven door, you will have to wait for the icon to

switch off: this indicates the oven temperature has dropped to an acceptable

level. You will notice some white dust deposits on the bottom and the sides

of your oven; remove these deposits with a damp sponge once the oven

has cooled down completely. Alternatively, you can make use of the already

heated oven, in which case it is not necessary to remove the deposits, they

are completely harmless and will not affect your food in any way.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit SCHO 103E P (BK) Bedienungsanleitung Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Indesit SCHO 103E P (BK)