Indesit FD 61.1 (WH)/HA S Bedienungsanleitung PDF herunterladen (Seite 17)

Installation

! Please keep this instruction booklet in a safe place for future reference. If

the appliance is sold, given away or moved, please make sure the booklet is

also passed on to the new owners so that they may benet from the advice

contained within it.

! Please read this instruction manual carefully: it contains important information

concerning the safe operation, installation and maintenance of the appliance.

Positioning

! Do not let children play with the packaging material; it should be disposed

of in accordance with local separated waste collection standards (see

Precautions and tips).

! The appliance must be installed by a qualied professional in accordance

with the instructions provided. Incorrect installation may damage property or

cause harm to people or animals.

Built-in appliances

Use an appropriate cabinet to ensure that the appliance operates properly:

• the panels adjacent to the oven must be made of heat-resistant material.

• cabinets with a veneer exterior must be assembled with glues which can

withstand temperatures of up to 100°C.

• to install the oven under the counter (see diagram) or in a kitchen unit,

the cabinet must have the following dimensions:

595 mm.

24 mm.

545 mm.

5 mm.

576 mm.

23 mm.

593 mm.

45 mm.

558 mm.

547 mm. min.

! The appliance must not come into contact with electrical parts once it has

been installed.

The indications for consumption given on the data plate have been calculated

for this type of installation.

Ventilation

To ensure adequate ventilation, the back panel of the cabinet must be

removed. It is advisable to install the oven so that it rests on two strips of

wood, or on a completely at surface with an opening of at least 45 x 560

mm (see diagrams).

560 mm.

45 mm.

Centring and xing

Position the 4 tabs on the side of the oven, in line with the 4 holes on the

outer frame. Adjust the tabs according to the thickness of the cabinet side

panel, as shown below:

20 mm thick: take off the removable part

of the tab (see diagram);

18 mm thick: use the rst groove, which

has already been set in the factory (see

diagram);

16 mm thick: use the second groove (see

diagram).

Secure the appliance to the cabinet by opening the oven door and inserting

4 screws into the 4 holes on the outer frame.

! All parts which ensure the safe operation of the appliance must not be

removable without the aid of a tool.

Electrical connection

Ovens equipped with a three-pole power supply cable are designed to operate

with alternating current at the voltage and frequency indicated on the data

plate located on the appliance (see below).

Fitting the power supply cable

1. Open the terminal board by inserting a

screwdriver into the side tabs of the cover.

Use the screwdriver as a lever by pushing

it down to open the cover (see diagram).

2. Install the power supply cable by

loosening the cable clamp screw

and the three wire contact screws

L-N- .

Connect the wires to the corresponding

terminals: the Blue wire to the terminal

marked (N), the Brown wire to the terminal

marked (L) and the Yellow/Green wire to

the terminal marked

(see diagram).

3. Secure the cable by fastening the

clamp screw.

4. Close the cover of the terminal board.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit FD 61.1 (WH)/HA S Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mikrowellen Indesit FD 61.1 (WH)/HA S