Indesit IFW 4841 P BL Gebrauchs- und Pflegeanleitung PDF herunterladen (Seite 9)

1. SELECT A FUNCTION

To select a function, turn the selection knob to the

symbol for the function you require: the display will

light up and an audible signal will sound.

2. ACTIVATE A FUNCTION

MANUAL

To start the function you have selected, turn the

thermostat knob to set the temperature you require.

Please note: During cooking you can change the function

by turning the selection knob or adjust the temperature by

turning the thermostat knob.

The function will not start if the thermostat knob is on .

You can set the cooking time, cooking end time (only if you

set a cooking time) and a timer.

TURN & COOK

To start the “Turn & Cook” function, select the

function turning the selection knob on the relevant

icon, keeping the thermostat knob on the

icon.

To end the cooking, turn the selection knob on “

”.

Please note: You can set the cooking end time and timer.

To obtain the best cooking results using the “Turn & Cook”

function, follow the suggested weights for each kind of food

in the following table.

Food Recipe Weight (kg)

Meat

Roast veal, Roast Beef rare 0.6 - 0.7

Chicken / Leg of lamb in

pieces

1.0 - 1.2

Fish

Salmon fillet / Baked fish

(whole)

0.9 - 1.0

Fish en papillote 0.8 - 1.0

Vegetables

Stuffed vegetables 1.8 - 2.5

Vegetable pie 1.5 - 2.5

Salty cakes Quiche lorraine / Flan 1.0 - 1.5

Pasta

Lasagne / Timbale of pasta

or rice

1.5 - 2.0

Pastry

Leavened cake / Plum cake 0.9 - 1.2

Baked apples 1.0 - 1.5

Bread

Bread loaf 0.5 - 0.6

Baguettes 0.5 - 0.8

DAILY USE

1. SETTING THE TIME

You will need to set the time when you switch on the

appliance for the first time: Press

until the icon

and the two digits for the hour start flashing on the

display.

Use or to set the hour and press to confirm.

The two digits for the minutes will start flashing. Use

o to set the minutes and press to confirm.

Please note: When the icon is ashing, for example

following lengthy power outages, you will need to reset the

time.

2. SET THE POWER CONSUMPTION

The oven is programmed to work at a power of less

than 2.9 kW (“Lo”): To operate the oven at a power

that is compatible with a domestic power supply of

greater than 3 kW (“Hi”), you will need to change the

settings.

To go to the change menu, turn the selection knob to

, then turn it back to

Press and hold and for five seconds immediately

afterwards.

Use o to change the setting, then press and hold

for at least two seconds to confirm.

3. HEAT THE OVEN

A new oven may release odours that have been left

behind during manufacturing: this is completely

normal.

Before starting to cook food, we therefore

recommend heating the oven with it empty in order

to remove any possible odours.

Remove any protective cardboard or transparent lm

from the oven and remove any accessories from inside it.

Heat the oven to 250 °C for about one hour,

preferably using the “XL Cooking” function. The oven

must be empty during this time.

Follow the instructions for setting the function

correctly.

Please note: It is advisable to air the room after using the

appliance for the rst time.

USING THE APPLIANCE FOR THE FIRST TIME

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit IFW 4841 P BL Gebrauchs- und Pflegeanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Indesit IFW 4841 P BL