Indesit FK 832 J X/HA Bedienungsanleitung PDF herunterladen (Seite 19)

Start-up and use

WARNING! The oven is provided

with a stop system to extract the

racks and prevent them from

coming out of the oven (1).

As shown in the drawing, to extract

them completely, simply lift the

racks, holding them on the front

part, and pull (2).

! The rst time you use your appliance, heat the empty oven with its door closed

at its maximum temperature for at least half an hour. Make sure that the room

is well ventilated before switching the oven off and opening the oven door. The

appliance may emit a slightly unpleasant odour caused by protective substances

used during the manufacturing process burning away.

Starting the oven

1. Select the desired cooking mode by turning the SELECTOR knob.

2. Select the desired temperature using the THERMOSTAT knob. A list

detailing cooking modes and suggested cooking temperatures can be found

in the Cooking advice table (see Cooking modes).

3. The THERMOSTAT indicator light indicates that the oven is heating up to

the temperature set.

4. During cooking it is always possible to:

- change the cooking mode by turning the SELECTOR knob;

- adjust the temperature by turning the THERMOSTAT knob;

- stop cooking by turning the SELECTOR knob to the “0” position.

! Never put objects directly on the bottom of the oven; this will prevent the

enamel coating from being damaged.

! Always place cookware on the rack(s) provided.

Cooling ventilation

In order to cool down the external temperature of the oven, a cooling fan

blows a stream of air between the control panel and the oven door, as well

as towards the bottom of the oven door.

! Once cooking has been completed, the cooling fan continues to operate

until the oven has cooled down sufciently.

Oven light

When selecting with the SELECTOR knob the oven light goes on. It

remains lit when a cooking mode is selected.

The electronic programmer

DISPLAY

SET TIME

button

END OF

COOKING icon

CLOCK icon

DURATION

icon

TIMER icon

DECREASE TIME

button

INCREASE TIME

button

•• ••

Setting the clock

! The clock may be set when the oven is switched off or when it is switched

on, provided that a the end time of a cooking cycle has not been programmed

previously.

After the appliance has been connected to the mains, or after a blackout, the

icon and the four numerical digits on the DISPLAY will begin to ash.

1. Press the button several times until the icon and the four digits on

the display begin to ash.

2. Use the “ ” and “ ” buttons to adjust the time; if you press and hold either

button, the display will scroll through the values more quickly, making it quicker

and easier to set the desired value.

3. Wait for 10 seconds or press the button again to nalise the setting.

Setting the timer

! This function does not interrupt cooking and does not affect the oven; it is

simply used to activate the buzzer when the set amount of time has elapsed.

1. Press the button several times until the icon and the three digits

on the display begin to ash.

2. Use the “ ” and “ ” buttons to set the desired time; if you press and hold

either button, the display will scroll through the values more quickly, making

it quicker and easier to set the value.

3. Wait for 10 seconds or press the button again to nalise the setting.

The display will then show the time as it counts down. When this period of

time has elapsed the buzzer will be activated.

Programming cooking

! A cooking mode must be selected before programming can take place.

Programming the cooking duration

1. Press the button several times until the icon and the three digits

on the DISPLAY begin to ash.

2. Use the “ ” and “ ” buttons to set the desired duration; if you press and

hold either button, the display will scroll through the values more quickly,

making it quicker and easier to set the value.

3. Wait for 10 seconds or press the button again to nalise the setting.

4. When the set time has elapsed, the text END appears on the DISPLAY,

the oven will stop cooking and a buzzer sounds. Press any button to stop it.

• For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is

programmed. The programme will stop automatically at 10:15 a.m.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit FK 832 J X/HA Bedienungsanleitung Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Indesit FK 832 J X/HA