Indesit BCS 313 A VE I S Bedienungsanleitung PDF herunterladen (Seite 18)

How to Start the Appliance

NOTICE

After the appliance has been delivered, stand it in the

upright position and wait approximately 3 hours be-

fore connecting it to the electrical outlet to guarantee

that it operates properly.

Before placing foodstuffs in the refrigerator or freezer, clean

the interior well with warm water and baking soda.

Motor protection time.

This model is provided with a motor protection system.

Therefore, if the compressor does not start immediately

after the user has turned it off, do not worry as it will

start automatically after approximately 8 minutes.

Once you have plugged the appliance into the mains socket,

make sure the display is on.

Freezer compartment

When you turn the appliance on (by turning the appliance ON/

OFF knob "B" to the required freezer compartment operating

temperature), we recommend you enable the SUPER FREEZE

function to speed up the cooling process inside the compartment;

when the latter has reached the optimal temperature, the

function will be disabled and you may place the frozen foods

inside the freezer.

Refrigerator compartment

When you turn the refrigerator compartment on (by turning

knob "A" to the required refrigerator compartment operating

temperature), we recommend you enable the SUPER COOL

function to speed up the cooling process inside the

compartment: after a few hours, you may place food inside

the refrigerator.

Temperature settings

If the compartment concerned is switched off, the word OFF

will appear on the relative indication space on the display (E

for the refrigerator and F for the freezer). If the compartment

is switched on, then the temperatures set at that time will

appear. To change them, turn the relative knob directly (A

for the refrigerator and B for the freezer).

The refrigerator compartment can be set to between +2°C

and +8°C, while the freezer compartment can be set to a tem-

perature of between -18°C and -26°C. The temperature in

both cases can be increased or decreased by 1°C at a time.

When the HOLIDAY function is enabled, temperature

regulations cannot be made, but the appliance automatically

sets itself to the best setting for the situation: +12°C for the

refrigerator compartment (if enabled) and -18°C for the

freezer compartment.

How to use the functions:

Function symbol during normal operation.

Function selected (outline flashing).

Function enabled (outline on)

Enabling/disabling the functions

Press the MODE button "C" as many times as necessary for

the red outline of the function you wish to act on to light

up: this indicates that the function has been selected and is

ready to be enabled or disabled. Now you can enable or

How to use the display

disable the selected function using the SELECT button "D".

NOTE: if you do not confirm your selection by pressing the

SELECT button within five seconds of the last action

performed on the display, the latter shall go back to displaying

the function previously set and indicate that no new

modification has been made.

The SUPER COOL function is linked to the refrigerator

compartment and when the latter is switched off, no action

whatsoever will be possible on the former, other functions

foresee an operation that can create conflicts (for example,

when the HOLIDAY and SUPER FREEZE functions are

enabled simultaneously), in this case a pre-set priority is taken

into consideration in order to help you operate the appliance.

The SUPER FREEZE function features a double mode of

operation (see paragraph on operating the freezer

compartment).

Enabling/disabling the DEMO mode:

To run a demonstration of the display operation while

keeping the appliance turned off, just enable the DEMO

mode.

Enabling:

- set the freezer temperature knob to 0;

- keep the two buttons “Select” and “Mode” pressed for

approximately 5 seconds, until you hear the buzzer and the

two words “OFF” and “OFF” flash on the display; these

words will flash for the entire duration the DEMO mode is

enabled.

Disabling:

- set the freezer temperature knob to 0;

- keep the two buttons “Select” and “Mode” pressed for

approximately 5 seconds, until you hear the buzzer and the

two words “OFF” and “OFF” on the display stop flashing.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit BCS 313 A VE I S Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kühl- und Gefrierschränke Indesit BCS 313 A VE I S