Indesit KN3C65A(X)/CZ Bedienungsanleitung PDF herunterladen (Seite 6)

Start-up and use

Using the oven

! The first time you use your appliance, heat the empty

oven with its door closed at its maximum temperature

for at least half an hour. Ensure that the room is well

ventilated before switching the oven off and opening

the oven door. The appliance may emit a slightly

unpleasant odour caused by protective substances

used during the manufacturing process burning away.

! Before operating the product, remove all plastic film

from the sides of the appliance.

! Never put objects directly on the bottom of the oven;

this will avoid the enamel coating being damaged.

1. Select the desired cooking mode by turning the

SELECTOR knob.

2. Select the recommended temperature for the

cooking mode or the desired temperature by turning

the THERMOSTAT knob.

A list detailing cooking modes and suggested cooking

temperatures can be found in the relevant table (see

Oven cooking advice table).

During cooking it is always possible to:

• Change the cooking mode by turning the

SELECTOR knob.

• Change the temperature by turning the

THERMOSTAT knob.

• Stop cooking by turning the SELECTOR knob to the

“0” position.

! Always place cookware on the rack(s) provided.

THERMOSTAT indicator light

When this is illuminated, the oven is generating heat.

It switches off when the inside of the oven reaches

the selected temperature. At this point the light

illuminates and switches off alternately, indicating

that the thermostat is working and is maintaining the

temperature at a constant level.

Oven light

This is switched on by turning the SELECTOR knob to

any position other than “0”. It remains lit as long as the

oven is operating. By selecting

 with the knob, the

light is switched on without any of the heating elements

being activated.

Electronic timer

The electronic timer displays the time

and the timer function with countdown.

Note: all the functions are operative approximately 7

seconds after they are stet.

How to reset the clock

After the appliance has been connected to the power

supply, or when the power has gone out, the clock

display will automatically reset to 0:00 and begin to

blink. 0 00

• Press the

button, and then use the and

buttons to set the correct time. To move the time

forward quickly, keep the buttons pressed.

Whenever the time must be reset, follow this same

procedure.

Timer Feature

Press the button to access this function. The

symbol „

„ will appear on the display. Each time you

press button

, the time will increase by 10 seconds

until 99 minutes and 50 seconds. If you continue to

press it, the time will increase from minute to minute up

to a maximum of 10 hours.

Use button

to go backwards.

After setting the desired time, start the countdown.

When the time has elapsed, the buzzer will sound, and

it can be interrupted by pressing any of the buttons.

You can display the time by pressing button

, and symbol „ „ indicates the timer function has

been set. After approximately 7 seconds, the display

automatically goes back to indicating the timer.

To cancel a previous setting

Press button

up until 0 00.

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit KN3C65A(X)/CZ Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Indesit KN3C65A(X)/CZ