Indesit I6GG0G(W)/UA Bedienungsanleitung PDF herunterladen (Seite 8)

Start-up and use

Using the hob

Lighting the burners

For each BURNER knob there is a complete ring

showing the strength of the flame for the relevant

burner.

To light one of the burners on the hob:

1. Bring a flame or gas lighter close to the burner.

2. Press the BURNER knob and turn it in an

anticlockwise direction so that it is pointing to the

maximum flame setting .

3. Adjust the intensity of the flame to the desired level

by turning the BURNER knob in an anticlockwise

direction. This may be the minimum setting , the

maximum setting  or any position in between the two.

If the appliance is fitted with an electronic lighting

device* (C), press the

ignition button*, marked

with the symbol



hold the

BURNER knob down and

turn it in an anticlockwise

direction, towards the

maximum flame setting,

until the burner is lit.The burner may be extinguished

when the knob is released. If this occurs, repeat the

operation, holding the knob down for a longer period of

time.

! If the flame is accidentally extinguished, switch off the

burner and wait for at least 1 minute before attempting

to relight it.

If the appliance is equipped with a flame failure safety

device (X)*, press and hold the BURNER knob for

approximately 2-3 seconds to keep the flame alight

and to activate the device.

To switch the burner off, turn the knob until it reaches

the stop position

•.

lame adjustment according to levels

he burner flame intensity can be adjusted with the

nob according to 6 power levels, from maximum

o minimum with 4 intermediate positions:

click will indicate the change from one level to

nother when turning the knob. The system

uarantees a more precise adjustment, allows

to replicate the flame intensity and to identify

easily the preferred level for different cooking

Practical advice on using the burners

For the burners to work in the most efficient way possible

and to save on the amount of gas consumed, it is

recommended that only pans that have a lid and a flat

base are used. They should also be suited to the size of the

burner.

To identify the type of burner, please refer to the diagrams

contained in the “Burner and nozzle specifications”.

! On the models supplied with a reducer shelf, remember

that this should be used only for the auxiliary burner when

you use casserole dishes with a diameter under 12 cm.

Using the oven

! The first time you use your appliance, heat the empty

oven with its door closed at its maximum temperature

for at least half an hour. Ensure that the room is well

ventilated before switching the oven off and opening the

oven door. The appliance may emit a slightly unpleasant

odour caused by protective substances used during the

manufacturing process burning away.

! Before operating the product, remove all plastic film from

the sides of the appliance.

! Never put objects directly on the bottom of the oven; this

will avoid the enamel coating being damaged. Only use

position 1 in the oven when cooking with the rotisserie spit.

Lighting the oven

To light the oven burner, bring

a flame or gas lighter close to

opening F (see figure) and press

the OVEN control knob while

turning it in an anticlockwise

direction until it reaches the MAX position.

If the appliance is fitted with an electronic lighting device*,

press the ignition button*, marked with the symbol



,then hold the OVEN control knob and turn it in an

anticlockwise direction, towards the MAX position, until

the burner is lit. If, after 15 seconds, the burner is still not

alight, release the knob, open the oven door and wait for

at least 1 minute before trying to light it again. If there is no

electricity the burner may be lit using a flame or a lighter,

as described above.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit I6GG0G(W)/UA Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Indesit I6GG0G(W)/UA