Indesit C 3V M5 (W) UA /HA S Bedienungsanleitung PDF herunterladen (Seite 11)

Start-up and use

! The first time you use your appliance, heat the empty

oven with its door closed at its maximum temperature

for at least half an hour. Ensure that the room is well

ventilated before switching the oven off and opening

the oven door. The appliance may emit a slightly

unpleasant odour caused by protective substances

used during the manufacturing process burning away.

! Before operating the product, remove all plastic film

from the sides of the appliance.

Starting the oven

1. Select the desired cooking mode by turning the

SELECTOR knob.

2. Select the recommended temperature for the

cooking mode or the desired temperature by turning

the THERMOSTAT knob.

A list detailing cooking modes and suggested cooking

temperatures can be found in the relevant table (see

Oven cooking advice table).

During cooking it is always possible to:

• Change the cooking mode by turning the

SELECTOR knob.

• Change the temperature by turning the

THERMOSTAT knob.

• Set the total cooking time and the cooking end time

(see below).

• Stop cooking by turning the SELECTOR knob to the

“0” position.

! Never put objects directly on the bottom of the oven;

this will avoid the enamel coating being damaged.

Only use position 1 in the oven when cooking with the

rotisserie spit.

! Always place cookware on the rack(s) provided.

THERMOSTAT indicator light

When this is illuminated, the oven is generating heat.

It switches off when the inside of the oven reaches

the selected temperature. At this point the light

illuminates and switches off alternately, indicating

that the thermostat is working and is maintaining the

temperature at a constant level.

Oven light

This is switched on by turning the SELECTOR knob to

any position other than “0”. It remains lit as long as the

oven is operating. By selecting

 with the knob, the

light is switched on without any of the heating elements

being activated.

Assembling the sliding rack kit*

To assemble the sliding racks:

1. Remove the two

frames, lifting them away

from the spacers A (see

 gure).

2. Choose which shelf

to use with the sliding

rack. Paying attention

to the direction in which

the sliding rack is to be

extracted, position joint

B and then joint C on the

frame.

3. Secure the two frames

with the guide rails

using the holes provided

on the oven walls (see

diagram). The holes

for the left frame are

situated at the top, while

the holes for the right

frame are at the bottom.

4. Finally, fit the frames on the spacers A.

! Do not place the sliding racks in position 5.

Left

guide rail

Right guide

rail

Direction

of extraction

* Only available in certain models.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit C 3V M5 (W) UA /HA S Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Indesit C 3V M5 (W) UA /HA S