Indesit KBT 6124ID IX 400/HA Bedienungsanleitung PDF herunterladen (Seite 18)

The safety devices

Pan recognition

Each induction cooking zone is fitted with a pan

recognition device. The cooking zone only provides

heat in the presence of a pan which is suitable for

the cooking zone.

A blinking pan recognition indicator could signal:

 that the pan is made of unsuitable material, which

is not ferromagnetic,

 that the diameter of the pan is too small,

 that the pan has been removed.

Always match the

diameter of the pan with thatdiameter of the pan with that

diameter of the pan with that

of the cooking zones.of the cooking zones.

of the cooking zones.

Warning: oval cooking zones

Oval cooking zones can only be boosted if the full

oval is enabled.

Do not place two small saucepans on oval cooking

zones.

What cookware to use

Given that induction only exists when the magnetic

field is sealed by a metallic recipient, the pan stops

being heated as soon as it is taken off the cooking

zone.

Use cookware made of material which is

compatible with induction (ferromagnetic

material).

Cast iron, enamelled steel or special induction

stainless steel saucepans are ideal.

Copper, ceramic, earthenware, glass, terracotta,

aluminium and non magnetic stainless steel

cookware is incompatible with induction cooking.

The easiest way to find out whether the pan is

suitable is with a magnet. If the magnet is

attracted by the pan bottom and stays stuck to the

same, the pan is made of ferromagnetic material

and can be used on your induction hob.

We recommend you use pans with a very flat and

thick bottom and avoid at all costs all cookware

with irregular rough bases which could scratch the

glass surface.

SUITABLE

UNSUITABLE

Cast iron

Enamelled steel

Special stainless steel

Copper,

Aluminium, Glass, Earthenware,

Ceramic, non magnetic Stainless steel

Acoustic signal

Anomalies such as:

 an object (such as a saucepan or a lid, etc.)

placed for more than 10 seconds on the control

zone,

 boiled-over liquids or food spilled on the control

zone,

 prolonged pressure on a key,...could cause a

beep to sound and the hob to turn off.

To stop the beep from sounding, remove the cause

of the malfunction.

To use the hob, turn it back on and re-select the

cooking zone(s) you wish to use. Set the desired

heating power.

Safety cut out

Your appliance is fitted with a safety cut out which

intervenes after a certain amount of time (see table)

depending on the power setting. When the safety

cut out has intervened, the power display indicates

0.

for example: the back right cooking zone is set to 5

and the front left zone is set to 2. The back right

zone will turn off after 4 hours of operation and the

front left zone will turn off after 6 hours of operation.

To unlock the controls, turn the hob off by pressing

the

key.

Power level Maximum duration of operation

1-2 10 hours

3 5 hours

4 4 hours

5-6 3 hours

7-8 2 hours

9 1 hour

Overheating protection device

Should your appliances electronic components

overheat, the hob will turn off automatically and a

will come up on the power level display.

The letter will disappear as soon as the temperature

drops back down to an acceptable level.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit KBT 6124ID IX 400/HA Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Indesit KBT 6124ID IX 400/HA