Indesit BAAN 23 W Bedienungsanleitung PDF herunterladen (Seite 19)

Troubleshooting

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.

Malfunctions:

The internal light does not

illuminate.

The refrigerator and the freezer do

not cool well.

The food inside the refrigerator is

beginning to freeze.

The motor runs continuously.

The appliance makes a lot of noise.

The alarm sounds and the lamp

flashes.

The alarm sounds and the set

temperature indicator lights flash

(all except the Fast Cool indicator

light, which is off).

The back wall of the refrigerator unit

is covered in frost or droplets of

water

There is water at the bottom of the

refrigerator.

Possible causes / Solutions:

 The plug has not been inserted into the electrical socket, or not far

enough to make contact, or there is no power in the house.

 The doors do not close properly or the seals are damaged.

 The doors are opened too frequently.

 The set TEMPERATURE indicator light is displaying an incorrect reading.

 The refrigerator or the freezer have been over-filled.

 The atmospheric temperature of the area surrounding the appliance is

lower than 14°C.

 The set TEMPERATURE indicator light is displaying an incorrect reading.

 The food is in contact with the back inside wall of the refrigerator.

 The door is not closed properly or is continuously opened.

 The outside ambient temperature is very high.

 The thickness of the frost exceeds 2-3 mm (see Maintenance).

 The appliance has not been installed on a level surface (see Installation).

 The appliance has been installed between cabinets that vibrate and

make noise.

 The internal refrigerant makes a slight noise even when the compressor is

off. This is not a defect, it is normal.

 The refrigerator door has been open for more than 2 minutes. The buzzer

will stop sounding when you shut the door.

 The appliance signals that it has overheated. We recommend checking

the condition of the food: it may need to be removed.

In this situation, the product continues functioning as in its normal

operating mode.

The buzzer can be stopped by simply opening and closing the door. To

stop the indicator lights from flashing, it is necessary to turn off the

appliance using the adjustment button (OFF), then use the same button

to switch on the appliance and restore normal operation at the desired

temperature.

 This shows the appliance is operating normally.

 The water discharge hole is blocked (see Maintenance).

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit BAAN 23 W Bedienungsanleitung Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kühlschränke Indesit BAAN 23 W