Indesit MTP 1911 F/HA Bedienungsanleitung PDF herunterladen (Seite 20)

Switching the appliance off

During cleaning and maintenance it is necessary to

disconnect the appliance from the electricity supply:

1. Hold the ON/OFF button down for more than two

seconds until OFF appears on both indicator displays

(refrigerator and freezer).

2. Pull the plug out of the socket.

! If this procedure is not followed, the alarm may sound.

This alarm does not indicate a malfunction. To restore

normal operation, hold the ON/OFF button down for

more than two seconds. To disconnect the appliance,

follow points 1 and 2 above.

Cleaning the appliance

 The external and internal parts and the rubber seals

may be cleaned using a sponge that has been soaked

in lukewarm water and bicarbonate of soda or neutral

soap. Do not use solvents, abrasive products, bleach

or ammonia.

 The removable accessories may be soaked in warm

soapy water or dishwashing liquid. Rinse and dry them

carefully.

 The back of the appliance may collect dust. This can

be removed by carefully using the hose of a vacuum

cleaner set on medium power. The appliance must be

switched off and the plug disconnected from the

electricity mains before it is cleaned.

Avoiding mould and unpleasant odours

 The appliance is manufactured with hygienic, odour

free materials. Food should be wrapped well and

containers closed properly in order to maintain this

hygiene. This will also prevent the formation of stains.

 If you wish to switch the appliance off for an extended

period of time, clean the inside and leave the doors

open.

Maintenance and care

Replacing the light bulb

To replace the light bulb in the refrigerator compartment,

disconnect the plug from the electricity mains.

Access the light bulb as shown

(see diagram) and replace it with

a similar light bulb, the power of

which should not exceed 10 W.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Keine Kommentare

Indesit MTP 1911 F/HA Bedienungsanleitung Seite 20