Indesit LTE H131 7 Bedienungsanleitung PDF herunterladen (Seite 22)

Anti-condensation strip*

After installing the dishwasher, open the door and stick the

adhesive transparent strip under the wooden shelf in order

to protect it from any condensation which may form.

Advice regarding the first wash cycle

After the installation, remove the stoppers from the racks and

the retaining elastic elements from the upper rack, if any.

Immediately before the fist washing, completely fill the salt

dispenser with water and add only then approximately 1

kg of salt

(seechapterentitledRinseaidandrefinedsalt)

The water may overflow: this is normal and is not a cause

for concern. Select the water hardness value

(see chapter

entitledRinseaidandrefinedsalt).

- After the salt has been

pouredinto the machine, the LOW SALT indicator light*

switches off.

If the salt container is not filled, the water softener and

the heating element may be damaged as a result.

Technical data

Dimensions

width 59.5 cm

height 82 cm

depth 57 cm

Capacity 14 standard place-settings

Water supply

pressure

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

7,25 – 145 psi

Power supply voltage See appliance data plate

Total absorbed power See appliance data plate

Fuse See appliance data plate

This dishwasher conforms to the

following European Community

Directives:

-2006/95/EC (Low Voltage)

-2004/108/EC (Electromagnetic

Compatibility)

-2009/125/EC (Comm. Reg.

1016/2010) (Ecodesign)

-97/17/EC (Labelling)

-2012/19/EC (WEEE)

The machine has a buzzer/set of tones

(depending on the

dishwasher model

) to inform the user that a command has

been implemented: power on, cycle end etc.

The symbols/indicator lights/LEDs on the control panel/

display may vary in colour and may have a flashing or fixed

light

(depending on the dishwasher model)

The display provides useful information concerning the type

of wash cycle, drying/wash-cycle phase, remaining time,

temperature etc etc.

Transportation

Unload all crockery from the dishwasher and secure moving

parts.

All water remaining inside the appliance should be drained

as follows:

makesurethatthewatertapisopenandselecttheECOcycle.

The cycle will begin. After 5 minutes, end the cycle by pressing

theON/OFFbuttonuntilyouhearabeepandtheindicatorlights

switchoff.Waitforapproximately5minutesbeforeuninstalling

the appliance. Shut off the tap and disconnect the inlet and

drain hose.

The appliance should only be moved in an upright position, in

order to prevent any water remaining inside the appliance from

damaging dishwasher components.

Leaving the machine unused for extended periods/

Freezing protection

Iftheapplianceissituatedinalocationwhichisatriskoffreezing,

or if you intend to be away for extended periods of time

(e.g.

holiday home)

, empty the appliance completely.

- Carry out the process used to drain all water remaining inside

the appliance

(see Transportation).

- Disconnect the appliance from the electricity supply and shut

off the water tap.

- Leave the appliance door ajar.

-Whenyoureturn,runacyclewhilethedishwasherisempty.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit LTE H131 7 Bedienungsanleitung Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Geschirrspüler Indesit LTE H131 7