Indesit IDCE 8454X A PS (NL) Bedienungsanleitung PDF herunterladen (Seite 26)

Options

The options allow for customising the selected programme according to one’s own needs.

Timed drying

After selecting a programme, press the “Timed drying” button to enter a drying time. Every time this button is pressed, the duration of

the selected drying cycle appears on the display. When pressed the first time, the highest allowed value for the selected cycle appears

on the display. When pressed each of the following times, the set time is reduced until OFF appears.

The buzzer will activate if the timed drying option is not available.

Delay Start

The start of some programmes (see Programmes and options) may be delayed up to 24 hours. Press the button repeatedly to enter

the desired delay time. Before setting a delayed start, make sure that the water container is empty and that the filter is clean.

Pre Anti-Crease

When this option is selected in addition to the “Delay start” option, the drum rotates garments at intervals during the delay period to

avoid creases forming.

Post Anti-Crease

When this option is selected, the drum rotates garments at intervals after the cool tumble cycle has ended, in order to avoid creases for-

ming on garments if they cannot be immediately removed at the end of the programme.

Note: If you have selected the Alarm option, this option is not available.

High Heat

When a drying time is selected, pressing this button sets a high heat drying and the indicator light above the button lights up. The

timed programmes are pre-set to low heat.

Alarm

A buzzer sounds at the end of the drying cycle to signal that the programme has ended and the garments are ready to be removed.

Note: If you have selected the Post Anti-Crease option, this option is not available..

Not all options are available on all programmes (see Programmes and options). If the button of an unavailable option is pressed, the

buzzer emits three signals.

Opening the door

If the door is opened (or the START/PAUSE button is pressed) while a programme is running, the dryer stops and the following may occur:

• The START/PAUSE button flashes orange.

• When a delayed start is running, the delay countdown continues. It is necessary to press the START/PAUSE button to resume

the “Delay start” programme. The “Delay start” indicator light flashes and the display visualises the time remaining to the start of the

selected programme.

• It is necessary to press the START/PAUSE button to resume the programme. The progress indicator lights signal the running pha-

se and the START/PAUSE indicator light stops flashing and turns green.

• During the post anti-crease phase, the programme ends. Pressing the START/PAUSE button reactivates a new programme from

the beginning.

• By turning the Programme selection knob, a new programme is selected and the START/PAUSE indicator light flashes green. This

procedure can be used to select the Cold drying programme to cool garments if they are judged to be dry enough.

Press the START/PAUSE button to start the new programme.

Heat Pump Protection System

The heat pump sytem has a compressor protection feature, that operates if you open the door or there is a power disruption or you

turn off the dryer. This system will prevent the heat pump compressor from starting for 5 minutes after the door is closed and the

programme started.

Note: If you have a power cut, switch off the power or remove the plug. When power is restored, plug in the machine, press and

hold the ON/OFF button until the dryer reactivates, then press Start/Pause button.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit IDCE 8454X A PS (NL) Bedienungsanleitung Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wäschetrockner Indesit IDCE 8454X A PS (NL)