Indesit FK 1041L P 0 X/HA Bedienungsanleitung PDF herunterladen (Seite 27)

Start-up and use

WARNING! The oven is provided with

a stop system to extract the racks and

prevent them from coming out of the

oven (1).

As shown in the drawing, to extract

them completely, simply lift the racks,

holding them on the front part, and

pull (2).

! The rst time you use your appliance, heat the empty oven with its door

closed at its maximum temperature for at least half an hour. Make sure that

the room is well ventilated before switching the oven off and opening the

oven door. The appliance may emit a slightly unpleasant odour caused by

protective substances used during the manufacturing process burning away.

! Turn the control dial to adjust the parameter shown on the display between

the “<” and “>” symbols.

! To make the setting process easier, keep the knob in position: this will

increase the scrolling speed of the numbers on the display.

! Each setting will automatically be stored in the appliance memory after 10

seconds.

! The touch controls cannot be activated if the user is wearing gloves.

Some models are equipped with a system of hinges which allows the door to

close slowly, without the user having to follow the movement through with his/

her hand. To use the system correctly, before closing the door:

• Open the door fully.

• Do not force the closing movement manually.

In order to optimise the cooking performance, when starting the selected

function, product settings will be applied that could cause a delayed start of

the fan and heating elements.

Switching the oven on for the rst time

After connecting the oven to the electricity supply, the rst time it is switched

on the user should also switch on the control panel by pressing the

button. The list of languages will appear in the menu. To choose the desired

language, select it using the control dial. Conrm by pressing the icon.

Once the selection has been made, the display will show the settings menu.

Press the icon or scroll through using the control dial until you reach the

EXIT command and press the icon to begin using the oven.

! After choosing the language in the menu, if the display is not used for another

30 seconds it will automatically revert to programming mode.

Setings menu commands

To enter the settings menu, switch on the control panel and press the icon.

Use the control dial to highlight the individual menu commands.

To modify the setting, press the icon.

The following parameters are listed in the menu:

LANGUAGE: select the language shown on the display.

PYROLYTIC: select the cleaning type.

CLOCK: set the exact time.

TONE: activate/deactivate keypad tone.

LIGHT: activate/deactivate the internal oven light during cooking.

LOGO: activate/deactivate logo on start-up.

GUIDE: activate/deactivate operating tips.

EXIT: exit the menu.

! It is possible to exit the settings menu by pressing the icon.

Control panel/door lock

! The door and control panel can be locked while the oven is off, once cooking

has started or nished and during programming.

The door/control panel lock can be used to lock the oven door and/or controls.

To activate it, press the icon and select the desired command by

pressing the control dial:

• NO LOCK: deactivate an active lock;

• ONLY BUTTONS: only lock the controls;

• ONLY DOOR: only lock the door;

• BUTTONS AND DOOR: lock the controls and the door.

Conrm by pressing the icon.

A conrmation buzzer will sound and the icon will appear on the display.

The lock may be activated while the oven is in use, or while it is switched off.

It can also be deactivated in all the above situations and after the oven has

nished cooking.

! When cleaning the appliance, the door lock may be closed accidentally

(there is an exposed spring). If this happens, reopen it by turning the door

lock upwards (see gure).

KO OK

Setting the clock

To set the clock, switch on the oven by pressing the icon, then press

and follow the steps described.

1. Scroll through the menu commands using the control dial, select CLOCK

and press .

2. Adjust the time using the control dial.

3. Once you have reached the correct hour value, press the icon.

4. Repeat steps 2 and 3 to set the minutes.

5. To exit adjustment mode, press the icon or use the control dial to scroll

through the menu until you reach EXIT, then press .

! The clock can also be set while the oven is off, by pressing the icon

and carrying out steps 2 to 4 as described above.

After the appliance has been connected to the mains, or after a blackout, the

clock will need to be reset.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 79 80

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit FK 1041L P 0 X/HA Bedienungsanleitung Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Indesit FK 1041L P 0 X/HA