Indesit CE6IFA.T X F /HA Bedienungsanleitung Seite 23

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 64
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 22
GB
23
Start-up and use
! Before operating the product, remove all plastic film
from the sides of the appliance.
Setting the clock
! The clock may be set when the oven is switched off or
when it is switched on, provided that a the end time of
a cooking cycle has not been programmed previously.
1. Press the
button several times until the icon
and the first two digits on the display start to flash.
2. Turn the TIMER KNOB towards “+” and “-” to adjust
the hour value.
3. Press the
button again until the other two digits
on the DISPLAY begin to flash.
4. Turn the TIMER KNOB towards “+” and “-” to adjust
the minute value.
5. Press the
button again to confirm.
Setting the timer
! This function does not interrupt cooking and does not
affect the oven; it is simply used to activate the buzzer
when the set amount of time has elapsed.
1. Press the
button several times until the icon
and the three digits on the display begin to flash.
2. Turn the TIMER KNOB towards “+” and “-” to adjust
the minute value.
3. Press the
button again to confirm.
The display will then show the time as it counts down.
When this period of time has elapsed the buzzer will be
activated.
Using the oven
! The first time you use your appliance, heat the empty
oven with its door closed at its maximum temperature
for at least half an hour. Ensure that the room is well
ventilated before switching the oven off and opening the
oven door. The appliance may emit a slightly unpleasant
odour caused by protective substances used during the
manufacturing process burning away.
1. Select the desired cooking mode by turning the
SELECTOR knob.
2. The oven begins its preheating stage and the
preheating indicator lights up.
The temperature may be changed by turning the
THERMOSTAT knob
3. When the preheating indicator
switches off and
a buzzer sounds the preheating process is complete:
you may now place the food in the oven.
4. The DISPLAY will show the icon
, which indicates
the recommended shelf level for the tray.
5. During cooking it is always possible to:
- change the cooking mode by turning the SELECTOR
knob
- change the temperature by turning the THERMOSTAT
knob
- set the cooking duration and the end cooking time
(see Cooking Modes)
- stop cooking by turning the SELECTOR knob to the
“0” position.
6. The oven switches off automatically after two hours:
this default period of time is set for all cooking modes
for safety reasons.
The cooking time may be modified (see Cooking
Modes).
7. If a blackout occurs while the oven is already in
operation, an automatic system within the appliance
will reactivate the cooking mode from where it was
interrupted as long as the temperature has not
dropped below a certain level. Programmed cooking
modes which have not started will not be restored and
must be reprogrammed.
! There is no preheating stage for the BARBECUE
mode.
! Never put objects directly on the bottom of the oven;
this will avoid the enamel coating being damaged.
! Always place cookware on the rack(s) provided.
Cooling ventilation
In order to cool down the external temperature of the
oven, a cooling fan blows a stream of air between the
control panel and the oven door. At the beginning of
the FAST CLEAN mode, the cooling fan operates at low
speed.
! Once cooking has been completed, the cooling fan
remains on until the oven has cooled down sufficiently.
Oven light
When the oven is not in operation, the lamp can be
switched on at any time by opening the oven door.
Seitenansicht 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare