Indesit PP Q40 TC SF Bedienungsanleitung PDF herunterladen (Seite 22)

! The position of the corresponding gas burner or

electric hotplate* is shown on every knob.

Gas burners

Each burner can be adjusted to one of the following

settings using the corresponding control knob:

0 Off

v Maximum

Minimum

To light one of the burners, hold a lit match or lighter

near the burner and, at the same time, press down

and turn the corresponding knob anti-clockwise to the

maximum setting.

Since the burner is fitted with a safety device, the

knob should be pressed for approximately 2-3

seconds to allow the automatic device keeping the

flame alight to heat up.

When using models with an ignition button, light the

desired burner pressing down the corresponding knob

as far as possible and turning it anticlockwise

towards the maximum setting.

! If a flame is accidentally extinguished, turn off the

control knob and wait for at least 1 minute before

trying to relight it.

To switch off the burner, turn the knob in a clockwise

direction until it stops (when reaches the “0” position).

The “separate double flame” burner*

This burner consists of two concentric burners which

can operate either together or separately.

Use of the double flame on the maximum setting

gives a very high power which reduces cooking times

with respect to conventional burners.

Moreover the double flame crown provides a more

uniform distribution of heat on the bottom of the pan,

when using both burners on minimum.

To ensure that the double-flame burner is used to

its full potential, never set the inside ring to mini-

mum and the outside ring to maximum at the

same time.

Pots and pans of all sizes can be used. In the case

of the smaller pots and pans we recommend the use

of only the internal burner.

There is a separate control knob for each of the

“separate double flame” burners.

The knob marked by the symbol

operates the

external burner;

The knob marked by the symbol

operates the

internal burner.

To turn on one of the rings, press the relative knob in

all the way and turn it anti-clockwise to the high

setting. The burner is fitted with an electronic igniter

that automatically starts when the knob is pressed

in.

Since the burner is equipped with a safety device,

after lighting the burner keep the knob pressed in for

about 2-3 seconds to allow the device which keeps

the flame lit automatically to heat up.

The selected burner can be regulated using the

corresponding knob, as follows:

0 Off

Maximum

Minimum

To switch off the burner, turn the knob in a clockwise

direction until it stops (when reaches the “0” position).

Practical advice on using the burners

To ensure the burners operate efficiently:

• Use appropriate cookware for each burner (see

table) so that the flames do not extend beyond the

bottom of the cookware.

• Always use cookware with a flat base and a cover.

• When the contents of the pan reach boiling point,

turn the knob to minimum.

Start-up and use

Note When there is no electricity supply, the burners can be

lit with a match after turning the control knob to the flame

position.

To turn on one of the burners, place a lighted match or

lighter near the burner, press the knob all the way in and

turn it anti-clockwise to the "High" setting.

Note

Burner ø Pan Diameter (cm)

A.Auxiliary

6 – 14

B.Semi-rapid

15 – 20

C.Rapid

21 – 26

D. Triple ring

24 - 26

I.Double ring DC-DR (inner)

10 - 14

I.Double ring DC-DR (outer)

24 - 28

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit PP Q40 TC SF Bedienungsanleitung Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Indesit PP Q40 TC SF