AUS
11
Switching the appliance off
Disconnect your appliance from the electricity
supply before carrying out any work on it.
DO NOT TOUCH HOT SURFACES. ALLOW
COOKTOP TO COOL COMPLETELY BEFORE
CLEANING.
Cleaning The Cooktop
•
Always wipe spills up when they occur. Do not
leave spills to dry onto the surface of the hob.
•
It is usually enough to wash the hob with a damp
sponge and dry it with absorbent kitchen roll.
•
NOTE: Do not put hot components in cold water.
The sudden temperature shock could cause the
component to crack.
•
Do not use abrasive or corrosive detergents such
as stain removers, anti-rust products, powder
detergents or sponges with abrasive surfaces:
these may scratch the surface beyond repair.
Burners
•
Wait for the cooktop to cool completely. Remove
the burner cap and check the gas outlet holes for
blockages. Clean with a soft bristle brush and
warm soapy water.
•
The removable parts of the burners should be
washed frequently with warm water and soap and
any burnt-on substances removed.
•
Dry the burner parts thoroughly before replacing.
Igniters
•
The terminal part of the electronic instant lighting
devices and flame failure probes should be
cleaned frequently,
Enamelled parts (trivets)
•
Never use abrasives, scouring pads or sharp
objects. This will cause irreparable damage to the
enamel.
•
Clean the enamelled parts with soapy water when
cold and wipe off with a clean, dry cloth. The
enamel could dull if cleaned while still hot.
Maintenance and care
Stainless steel and chromed parts
•
Stainless steel can be marked by hard water that
has been left on the surface for a long time, or by
aggressive detergents containing phosphorus.
After cleaning, rinse and dry any remaining drops
of water.
•
Use commercial products designed for cleaning
stainless steel and chromed steel, and follow the
maker’s instructions. Care should be taken when
cleaning around graphics.
•
Never use steam cleaners or pressure cleaners on
the appliance.
Gas tap maintenance
Over time, the taps may become jammed or difficult
to turn. If this happens, the tap must be replaced.
! This procedure must be performed by a
qualified technician authorised by the
manufacturer.
(72 Seiten)
(68 Seiten)
(28 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern