Indesit K3G12(W)/U Bedienungsanleitung PDF herunterladen (Seite 18)

•

turn the tap to minimum;

• remove the knob and adjust the regulation screw, which

is positioned in or next to the tap pin, until the flame is

small but steady.

N.B.: in the case of liquid gas, the regulation screw

must be screwed in to the bottom.

• check that the flame does not turn off when you turn

the tap quickly from high to low.

c) Regulating the primary air of the burners:

The primary air of the burners requires no regulation.

Important

On completion of the operation, replace the old rating

sticker with one indicating the new type of gas used. This

sticker is available from our Service Centres.

Note

Should the pressure of the gas used be different (or vary)

from the recommended pressure, it is necessary to fit a

suitable pressure regulator onto the inlet pipe in

compliance with current National Regulations relative to

“regulators for channelled gas”.

Burner and nozzle characteristics

K3G11/U

K3G12 /U

K3G12A/U

* At 15°C and 1013 mbar- dry gas

G30 (GPB-B) P.C.S. = 49,47 MJ/Kg

G20 (GZ50) P.C.S. = 37,78 MJ/m

GZ350 (GZ35) P.C.S. = 27,20 MJ/m

Table 1 G30 (GPB-B) G20 (GZ50) GZ350 (GZ35)

Burner Diameter

(mm)

Thermal

power

(p.c.s.*)

By-pass

1/100

(mm)

Nozzle

1/100

(mm)

Thermal

power

(p.c.s.*)

Flow *

g/h

Thermal

power

(p.c.s.*)

Injector

1/100

(mm)

Flow*

l/h

Injector

1/100

(mm)

Flow*

l/h

Reduc. Nominal Nominal

Fast (large) (R) 100 0.70 41 87 3.40 247 3.00 128 286 158 397

Semi-fast (medium) (S) 75 0.40 30 70 2.20 160 1.90 104 181 143 251

Auxiliary (Small) (A) 51 0.40 30 52 1.30 95 1.00 76 95 106 132

Supply pressure

Nom.

Min.

Max.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit K3G12(W)/U Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Indesit K3G12(W)/U