Indesit IX 644 CRFH E Bedienungsanleitung PDF herunterladen (Seite 5)

• Fan noise: a fan is necessary to ensure the hob functions

correctly and to safeguard the electronic unit from possible

overheating. The fan functions at maximum power when

the large induction element is at maximum power or when

the booster function is on; in all other cases, it works at

average power depending on the temperature detected.

Furthermore, the fan may continue to work even after

switching the hob off, if the temperature detected is high.

The types of noise listed above are due to induction

technology and are not necessarily operational faults.

! If the (-)or (+)button is pressed for an extended period of

time, the display scrolls quickly though the power levels

and timer minutes.

Initial Light Conditions

When power is initially applied to the Cooktop, the to-

uch control conducts a calibration process for the touch

keys, which requires a low level of ambient light in the

area of the touch keys.

If during this calibration process excessive ambient ligh-

ting is detected the User Interface displays „FL” (Infra-

red Ambient Light Error) and the control calibration pro-

cess is suspended. In order to rectify the process any

lighting that could effect the calibration process should

be switched off (e.g. halogen cooker hood lighting). The

error will disappear when satisfactory ambient lighting

is detected and the touch control calibration procedure

will now complete satisfactorily.

-The „FL” error can only be generated within approx 3s

of initial power being applied to the cooktop.

-We recommend that the user switches off all cooker

hood lighting and lighting directed towards the cooktop

when power is initially applied to the cooktop.

-After the touch control has conducted its initial calibra-

tion process, (approx 3s) any cooker hood or other ligh-

ting can be switched on as normal and will not affect the

operation of the touch control.

Switching on the hob

When power is initially applied to the Cooktop, the

touch control conducts a calibration process for the

touch keys, which requires a low level of ambient li-

ght in the area of the touch keys. If excessive ambient

lighting is detected, the User Interface displays „FL”

error and the calibration is suspended. The error will

disappear when satisfactory ambient lighting is de-

tected and the touch control calibration procedure

will now complete satisfactorily

After connecting the hob to the electrical grid, the

touch pannel might be automatically locked. To un-

clock the pannel press and hold the Control Panel

Loock button .

To switch the hob on, press and hold the button for

approximately one second.

* Only available in certain models.

The cooktop is switched On when a beep sound is

emitted and the cooking zones display shows the „0”

When the cooktop is off, after 5 sec. without any error/

alarm or residual heat to display, the control switches

off the (KEYLOCK LED)

. in order to reduce power

consumption. As soon as we touch a key, the (KEYLOCK

LED)

. goes on and we can continue to operate as

usual.

Switching off the cooktop is signalled by 3 beep sound.

Setting the Power Management

The Cooktop maximum power limit (7200W) can be

reduced by the user to 2800W, 3500W or 6000W (ECO

Power Limits).

The sequence to set a new Cooktop Power Limit is:

·During the first 30 seconds after plugging the applian-

·The Touch has to be unlocked and all Heaters Off

·Press at the same time the left and right end heaters

[+] and [-] keys.

·Once this is done, a beep sounds and “Po” characters

will be in the timer displays and the “actual Cooktop

Power Limit” will be in the left and right end heater

displays.

For selecting a new Power Limit:

·With the (+) and (-) keys, the Power Limit is increased.

The selectable powers are: 2800W, 3500W, 6000W or

7200W. When the power is 7200W, if the [+] or [-] key

is touched the power changes to 2800W.

The sequence to finish recording the new Cooktop

Power Limit is:

·Press at the same time the left and right end heaters

[+] and [-] keys.

·Once this is done, new Cooktop Power Limit is recor-

ded and there is a system reset.

To finish without recording changes:

·If during 60 seconds there is no action, changes are

not recorded and there is a system reset.

Switching on the cooking zones

Each cooking zone is switched on and controlled using the

(-) and (+) POWER buttons, which at the same time

are used for power adjustment.

• To begin operating a cooking zone, set the desired

power level (between 0 and 9) using the (-) and (+)

POWER buttons

Press and hold the (-) POWER button to set the power

level immediately at “9”

Press and hold (+) and (-) POWER buttons simulta

neously to return to power level “0”

If the power level is “0” press and hold the (+) button to

increase the power level quickly.

1 2 3 4 5 6 7 8 9 10 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit IX 644 CRFH E Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Indesit IX 644 CRFH E