Indesit CI65S E97(X) RU/HA Bedienungsanleitung PDF herunterladen (Seite 18)

• If the cooker is

installed underneath a

wall cabinet, there must

be a minimum distance

of 420 mm between

this cabinet and the top

of the hob.

This distance should

be increased to 700

mm if the wall cabinets

are flammable (

see

figure

• Do not position blinds behind the cooker or less

than 200 mm away from its sides.

• Any hoods must be installed in accordance with

the instructions listed in the relevant operating

manual.

Levelling

If it is necessary to level the

appliance, screw the

adjustable feet into the

positions provided on each

corner of the base of the

cooker (

see figure

The legs* fit into the slots on

the underside of the base of

the cooker.

Electrical connection

Install a standardised plug corresponding to the

load indicated on the appliance data plate (

see

Technical data table

The appliance must be directly connected to the

mains using an omnipolar switch with a minimum

contact opening of 3 mm installed between the

appliance and the mains. The switch must be

suitable for the charge indicated and must comply

with current electrical regulations (the earthing wire

must not be interrupted by the switch). The supply

cable must be positioned so that it does not come

into contact with temperatures higher than 50°C at

any point.

HOOD

420

Min.

min. 650 mm. with hood

min.

700 mm. without hood

mm.

600

Min. mm.

420

Min. mm.

Before connecting the appliance to the power

supply, make sure that:

• The appliance is earthed and the plug is compliant

with the law.

• The socket can withstand the maximum power of

the appliance, which is indicated by the data

plate.

• The voltage falls between the values indicated on

the data plate.

• The socket is compatible with the plug of the

appliance. If the socket is incompatible with the

plug, ask an authorised technician to replace it.

Do not use extension cords or multiple sockets.

! Once the appliance has been installed, the power

supply cable and the electrical socket must be

easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced

by authorised technicians only.

! The manufacturer declines any liability should

these safety measures not be observed.

Gas connection

Connection to the gas network or to the gas cylinder

may be carried out using a flexible rubber or steel

hose, in accordance with current national legislation

and any subsequent amendments in force, after

making sure that the appliance is suited to the type

of gas with which it will be supplied (see the rating

sticker on the cover: if this is not the case

see

below

). When using liquid gas from a cylinder,

install a pressure regulator which complies with

current national regulations and any subsequent

amendments in force. To make connection easier, the

gas supply may be turned sideways*: reverse the

position of the hose holder with that of the cap and

replace the gasket supplied with the appliance.

! Make sure that the gas supply pressure is

consistent with the values indicated in the Table of

burner and nozzle specifications (

see below

). This

will ensure the safe operation and durability of your

appliance while maintaining efficient energy

consumption.

Gas connection using a flexible rubber hose

Make sure that the hose complies with current

national legislation. The internal diameter of the hose

must measure: 8 mm for a liquid gas supply; 13

mm for a methane gas supply.

Only available in certain models.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit CI65S E97(X) RU/HA Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Indesit CI65S E97(X) RU/HA