6
GB
2. If the word “OK” does not appear it means that the temperature
is too high:set the FRIDGE TEMPERATURE on a colder value,
and then wait 10 hours until the temperature becomes stable.
3. Check the indicator light again: if necessary, readjust it
following the initial process. If large quantities of food have
been added or if the refrigerator door has been opened
frequently, it is normal for the indicator not to show OK. Wait
at least 10 hours before you set the FRIDGE temperature on a
colder value.
MULTI USE DRAWER* container
This is the new box which offers maximum flexibility in order to
stock your food in an excellent way.
If you put in the low section of your fridge compartment, on the
crisper box, it becomes CHILLER, and it guarantees a temperature
very close to 0°C, which is ideal to:
-store meat, fish and delicate food;
-rapid cooling of hot foods;
-low temperature defrosting (it inhibits the proliferation of
microorganisms).
You can get the 0°C temperature, in standard conditions, when
the fridge compartment temperature is at about 4°C.
By decreasing the fridge temperature you decrease the CHILLER
compartment temperature too.
If you put it in the “upper” part of the fridge compartment (A1), it
will be suitable to store fruit and vegetables, thus giving you the
possibility to have a second crisper box.
Operation and maintenance of the water
dispenser.
When first used, or after prolonged periods of inactivity, wash the
tank with water. The water dispenser supplies cold water without
having to open the refrigerator door each time.
This also allows for reducing the product’s energy consumption.
To fill the tank, lift the flap or remove the cover (see picture) then
pour in the water with a carafe or other suitable container. Avoid
filling the tank completely.
1
2
Always exclusively use drinkable natural mineral water: any
other liquid may hamper the device’s correct operation.
To withdraw water with the refrigerator door closed, press the
dispenser actuator with a suitable container (glass, carafe, etc.).
Release the actuator once the desired quantity has been dispensed.
The water tank should be cleaned regularly under running water; do
not use detergents. To clean the tank, remove the tank cover and
upper ledges; subsequently, remove the tank by pulling it outwards
while pressing the appropriate button (see picture).
The tank must be replaced back into its housing as soon as
possible so as to avoid excessive heating of the refrigerator.
4
4
3
5
6
For more thorough cleaning, it is advisable to unscrew the valve
from the tank (see picture) and clean it under running water.
! Be careful not to pull the transparent mobile element of the valve.
7
Once cleaning operations have been completed, screw the
valve back on while ensuring that the internal seal adheres to the
end part of the tank bushing; subsequently, put the tank-valve
assembly back into the appropriate cylindrical housing of the
door, while making sure that the upper hook on the rear wall of
the tank is properly inserted in the appropriate compartment on
the inner wall of the door. Put the previously removed ledges and
tank cover back in place.
! Make sure that the tank has been properly inserted in the
door (see picture).
(20 Seiten)
(40 Seiten)
(40 Seiten)
(64 Seiten)
(16 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern