Indesit RD 1176 JD UK Bedienungsanleitung PDF herunterladen (Seite 10)

How to run a wash cycle or a

drying cycle

1. SWITCH THE MACHINE ON. Press the On/Off button ;

the text HOTPOINT will appear on the display and the START/

PAUSE indicator light will flash slowly in a green colour.

2. LOAD THE LAUNDRY. Open the porthole door. Load

the laundry, making sure you do not exceed the maximum

load value indicated in the table of programmes on the

following page.

3. MEASURE OUT THE DETERGENT. Open the

detergent dispenser drawer and pour the detergent into

the relevant compartments as described in “Detergents

and laundry”.

4. CLOSE THE DOOR.

5. SELECT THE WASH CYCLE. Use the WASH CYCLE

SELECTOR knob to select the desired wash cycle; the

name of the wash cycle will appear on the display. A

temperature and spin speed is set for each wash cycle;

these may be adjusted. The duration of the cycle will

appear on the display.

6. CUSTOMISE THE WASH CYCLE. Use the relevant

buttons:

Modifying the temperature and/or spin speed. The

machine automatically selects the maximum temperature

and spin speed set for the selected wash cycle; these

values cannot therefore be increased. The temperature

can be decreased by pressing the button, until the cold

wash (the display will visualise the “--” symbol) setting is

reached. The spin speed may be progressively reduced by

pressing the button, until it is completely excluded (the

display will visualise the “--” symbol). If these buttons are

pressed again, the maximum values are restored.

! Exception: if the 5 programme is selected, the

temperature can be increased up to a value of 40°C.

! Exception: if the 7 programme is selected, the

temperature can be increased up to a value of 90°C.

! Exception: if the 9 programme is selected, the

temperature can be increased up to a value of 60°C.

Setting a delayed start.

To set a delayed start for the selected programme, press

the corresponding button repeatedly until the required

delay period has been reached. To remove the delayed

start function press the button until the text “-- h” appears

on the display.

Setting the drying cycle.

The desired drying cycle type may be set by pressing the

DRYING button once or several times. Two options are

available:

A - Based on the how damp the clothes are once they

have been dried:

Iron: suitable for clothes which will need ironing afterwards.

the remaining dampness softens creases, making them

easier to remove.

Hanger: ideal for clothes which do not need to be dried fully.

Cupboard: suitable for laundry which can be put back in a

cupboard without being ironed.

Extra: suitable for garments which need to be dried

completely, such as sponges and bathrobes.

B - Based on a set time period: between 30 and 180 minutes.

To exclude the drying phase press the relevant button until

the text OFF appears on the display.

If your laundry load to be washed and dried is much greater

than the maximum stated load, perform the wash cycle, and

when the cycle is complete, divide the garments into groups

and put some of them back in the drum. At this point, follow

the instructions provided for a “Dry only” cycle. Repeat this

procedure for the remainder of the load. A cooling-down

period is always added to the end of each drying cycle.

Dry only

Press button to perform the drying-only cycle.

After selecting the desired cycle (compatible with the type

of garments), press button to exclude the washing

phase and start the drying phase at the maximum level for

the selected cycle. The drying level or time may be set and

changed by pressing the drying button . (Not compati-

ble with cycles 1-2-3-4 and 14).

Set the rinse type.

Option makes it possible to select the desired rinse

type for sensitive skin. Press the button once for the “Extra

+1” level, which makes it possible to select an additional

rinse after the standard cycle rinse and remove all traces

of detergent. Press the button again for the “Extra +2”

level, which makes it possible to select two additional

rinses to the standard cycle rinses; it is recommended

for very sensitive skin. When the button is pressed for the

third time, the “Extra +3” level is set, thus allowing the

selection of 3 rinses in addition to the standard cycle’s

rinses. The option - started with cycles at a temperature of

40°C - makes it possible to remove major allergens such

as pollen, cat and dog hair. With cycles at a temperature

higher than 40° a very good level of antiallergic protection

is achieved. Press the button again to go back to the

“Normal rinse” rinse type. If the current adjustment can

be neither set nor changed, the display will show “No

Selection” or “No Change”.

Modifying the cycle settings.

• Press the button to enable the function; the relevant

indicator light on the display will light up.

• Press the button again to disable the function; the

relevant indicator light on the display will switch off.

! If the selected function is incompatible with the set

programme, the relevant indicator light will appear dimly lit;

in addition, the incompatibility will be signalled by a buzzer

(3 beeps) and the wording “No Selection” will appear on

the display.

! If the selected function is incompatible with another

previously set function, the wording “No Selection” will

appear on the display and the function will not be enabled.

! The functions may affect the recommended load value

and/or the duration of the cycle.

7. START THE PROGRAMME. Press the START/PAUSE

button. The corresponding indicator light will become

green, remaining lit in a fixed manner, and the door will be

locked (the DOOR LOCKED symbol will be on). During

the wash cycle, the name of the phase in progress will

appear on the display. To change a wash cycle while it is in

progress, pause the washer-dryer using the START/PAUSE

button (the START/PAUSE indicator light will flash slowly in

an orange colour); then select the desired cycle and press

the START/PAUSE button again. To open the door while

a cycle is in progress, press the START/PAUSE button; if

the DOOR LOCKED symbol is switched off the door

may be opened. Press the START/PAUSE button again

to restart the wash cycle from the point at which it was

interrupted.

8. THE END OF THE WASH CYCLE. This will be indicated

by the text “CYCLE END” on the display; when the DOOR

LOCKED symbol switches off the door may be opened.

Open the door, unload the laundry and switch off the machine.

! If you wish to cancel a cycle which has already begun, press

and hold the button. The cycle will be stopped and the

machine will switch off.

Direct Injection

The washer-dryer is equipped with the innovative technology

«Direct Injection» which pre-mixes water and detergent, thus

immediately activating the detergent’s cleaning principles.

This active emulsion is directly introduced into the drum of the

washer-dryer and penetrates the fibres with more efficacy in

cleaning even heavily soiled garments at low temperatures,

fully preserving colours and fabrics.

The mode «Power» ensures the best cleaning performance

and the mode «EcoEnergy» allows more energy saving.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit RD 1176 JD UK Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Waschmaschinen Indesit RD 1176 JD UK