Indesit CI 86I W Bedienungsanleitung Seite 30

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 46
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 29
- 31 -
Hob
Before operating the product, remove all plastic film from the sides of the appliance.
! The glue applied on the gaskets leaves traces of grease on the glass. Before using the appliance, we recommend you
remove these with a special non-abrasive cleaning product. During the first few hours of use there may be a smell of rubber
which will disappear very quickly.
! A few seconds after the hob is connected to the electricity supply, a buzzer will sound. The hob may now be switched on.
Switching on the hobSwitching on the hob
Switching on the hobSwitching on the hob
Switching on the hob
To switch the hob on, press and hold the button for about a second.
Switching on the cooking zonesSwitching on the cooking zones
Switching on the cooking zonesSwitching on the cooking zones
Switching on the cooking zones
Each cooking zone is controlled by a device consisting of two buttons (- and +).
Press the "+" button to activate the hotplate, then set the power to the level required using the "-" and "+" buttons.
To set the power to maximum, hold down the "-" button briefly.
Booster functionBooster function
Booster functionBooster function
Booster function
The booster function for the rear cooking zones may be used to shorten heating-up times. It is activated by pressing the
button. "P" will appear on the power indicator display. This function boosts the power of the relevant zone to 3000 W. It stops
automatically after 4 minutes. Until the booster of one of the rear zones is activated, the front zones have a maximum power
of 600 W (e.g. if the right rear hotplate booster is activated, the power of the right front hotplate decreases).
Switching off the cooking zonesSwitching off the cooking zones
Switching off the cooking zonesSwitching off the cooking zones
Switching off the cooking zones
Press the "-"button: the power of the cooking zone will progressively decrease until it is switched off.
Alternatively, the "-" and "+" buttons may be pressed simultaneously. This immediately returns the power setting to
0 and the cooking zone switches off.
Programming the cooking timeProgramming the cooking time
Programming the cooking timeProgramming the cooking time
Programming the cooking time
! All the cooking zones may be programmed for a length of time between 1 and 99 minutes.
1. Select the cooking zone using the corresponding selector button.
2. Adjust the temperature.
3. Press the
programming button.
3. Set the cooking time using the "-" and "+" buttons.
4. Confirm by pressing the
button.
The timer begins counting down immediately. A buzzer sounds for about 1 minute and the cooking zone switches off when
the set programme has finished. Repeat the above procedure for each hotplate you wish to programme.
Control panel lockControl panel lock
Control panel lockControl panel lock
Control panel lock
When the hob is switched on, it is possible to lock the oven controls to avoid accidental changes to the settings (by
children, during cleaning, etc.). Press the
button to lock the control panel: the indicator light above the button will switch
on. To use any of the controls (e.g. to stop cooking), you must switch off this function. Press the
button for a few
moments, the indicator light will switch off and the lock function will be removed.
Switching off the hobSwitching off the hob
Switching off the hobSwitching off the hob
Switching off the hob
Press button to switch the appliance off. If the control panel lock is on, the controls will continue to be locked even after
the hob is switched on again. In order to switch the hob on again, you must first remove the lock function.
Seitenansicht 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 45 46

Kommentare zu diesen Handbüchern

Keine Kommentare