Indesit MTP 1922 F/HA Bedienungsanleitung PDF herunterladen (Seite 18)

Start-up and use

Starting the appliance

! After transportation of the appliance, carefully place it in an

upright position and wait at least 3 hours before connecting

it to the electricity mains, to make sure it operates as it

should.

 Clean the inside of the refrigerator well using warm water

and bicarbonate of soda before placing food inside it.



The appliance comes with a motor protection control

system which makes the compressor start

approximately 8 minutes after being switched on. The

compressor also starts each time the power supply is

cut off whether voluntarily or involuntarily (blackout).

Freezer Compartment

When the product is switched on the freezer compartment

is set to its default value of -18°C. We recommend that the

SUPER FREEZE function is set (the freezer status bar

continues to display the set value) in order to accelerate the

cooling process of the compartment; when the inside of the

compartment has reached its optimal temperature the

function will be deactivated and the food may be placed

inside.

Refrigerator Compartment

When the appliance is switched on the refrigerator

compartment is set to its default value of +5°C. We

recommend that the SUPER COOL function is set (the

refrigerator status bar continues to display the set value) in

order to accelerate the cooling process of the

compartment. After a few hours it will be cool enough for

food to be placed inside.

Navigating the display

Setting the temperatures:

If the product is switched on, the refrigerator and freezer

status bars will indicate the temperatures set at that

moment. To change them, simply press the

and

buttons corresponding to the compartment for which you

wish to change the set temperature. More specifically, each

time one of the buttons is pressed the temperature is

increased or decreased by 1°, and the level of cold is

adjusted accordingly.The temperature values that may be

selected for the refrigerator compartment are +12°C, +7°C,

+6°C, +5°C, +4°C, +3°C and +2°C, while the values that

may be set for the freezer are -18°C, -19°C, -120°C, -21°C,

-22°C, -24°C and -26°C.

The temperatures are automatically set to +5°C for the

refrigerator compartment and -18°C for the freezer

compartment (these are standard food storage values.

When the I Care function is active, the appliance

automatically adjusts the temperatures according to the

conditions inside and outside the refrigerator; the operation of

this function is signalled by the text AUTO.

Whenever it is necessary to activate the I Care function at

temperatures that are different to the standard storage values,

the I Care button must be pressed as soon as the function

is activated and held down while the new temperatures are

set using the

and buttons. Under these conditions, the

temperatures may be set to 4°C, 5°C and 6°C for the

refrigerator compartment and -18°C, -19°C and -20°C for the

freezer compartment.

When the HOLIDAY function is active the temperature may

not be adjusted, however the appliance adjusts itself

automatically so that the optimal settings for the situation are

used: +12°C for the refrigerator compartment and -18°C for

the freezer compartment. This function is indicated by the

text.

To activate and deactivate the functions simply press the

relevant button and the function status will be signalled by the

corresponding LED switching on or off.

Several functions (SUPER COOL, SUPER FREEZE, ICE

PARTY, I CARE) are incompatible with others (HOLIDAY,...);

remember that there is a pre-set order of priority which will

help you to use the product in the best possible way.

When the Ice Party function has finished, press the ICE

PARTY button to stop the corresponding LED from flashing

and to silence the sound signal. This flashing and sound signal

indicates that the function is complete and that the bottle

should be removed from the freezer compartment.

Child Lock

In order to activate the Child Lock function, the Child Lock

button must be pressed for 2 seconds; the activation of the

button lock is confirmed by a short beep and the illumination

of the corresponding LED.

To deactivate the function, press the Child Lock button for 2

seconds; deactivation will be confirmed by a short beep and

by the corresponding LED switching off.

! The FREEZER status bar is also used to indicate an

unusual temperature increase in the freezer

compartment (see Troubleshooting).

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit MTP 1922 F/HA Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kühl- und Gefrierschränke Indesit MTP 1922 F/HA