Indesit BAAN 10 Bedienungsanleitung PDF herunterladen (Seite 14)

Start-up and use

Starting the appliance

! Before starting the appliance, follow the

installation instructions (

see Installation

! Before connecting the appliance, clean the

compartments and accessories well with lukewarm

water and bicarbonate.

1. Insert the plug into the socket and ensure that the

internal light illuminates.

2. Turn the TEMPERATURE ADJUSTMENT knob to an

average value. After a few hours you will be able to

put food in the refrigerator.

Setting the temperature

The temperature inside the refrigerator compartment

automatically adjusts itself according to the position of

the thermostat knob.

= warmest

= coldest

We recommend, however, a medium position.

The cooling section of the refrigerator is located inside

the back wall of the refrigerator compartment for

increased space and improved aesthetics. During

operation, the back wall will be covered in frost or

water droplets depending on whether the compressor

is operating or paused. Do not worry, the refrigerator is

functioning normally.

Chiller system

The appliance comes with one of the chiller systems

described below: take note of your system in order to

determine the most efficient food storage method.

PURE WIND / PURE WIND PLUS*

It is recognizable due to the presence of the

mechanism on the top part of the refrigerator

compartment (

see diagram

PURE WIND / Pure Wind Plus maximises air

circulation, improving the efficiency of the evaporator

and helping to achieve the optimal temperature inside

the refrigerator as quickly as possible each time it has

been opened. The blown air (A) is cooled when it

comes into contact with the cold wall, whereas the

hotter air (B) is sucked up (

see diagram

The Pure Wind Plus products are also equipped with a

filter which, thanks to the inclusion of silver ions,

makes it possible to reduce bacteria by 70% and to

eliminate odours inside the refrigerator unit, thereby

guaranteeing improved food storage.

If the TEMPERATURE ADJUSTMENT knob has been

set on high values with large quantities of food and

with a high ambient temperature, the appliance can

operate continuously, resulting in excessive frost

formation and excessive energy consumption:

compensate for this by shifting the knob towards lower

values (defrosting will occur automatically).

Static

Models without the Aircooler have the cooling section in

the internal back wall of the compartments. The wall will

be covered in frost or water droplets depending on

whether the compressor is operating or paused: both

cases are normal. If the TEMPERATURE ADJUSTMENT

knob has been set on high values with large quantities

of food and with a high ambient temperature, the

appliance can operate continuously, resulting in

excessive frost formation and excessive energy

consumption: compensate for this by shifting the knob

towards lower values (defrosting will occur

automatically).

In static appliances, the air circulates in a natural way:

the colder air tends to move downwards as it is heavier.

The food should be stored as follows:

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit BAAN 10 Bedienungsanleitung Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kühlschränke Indesit BAAN 10