Indesit BIAA 33 F H Bedienungsanleitung PDF herunterladen (Seite 21)

Installation

! Before placing your new appliance into operation please read these

operating instructions carefully. They contain important information

for safe use, for installation and for care of the appliance.

! Please keep these operating instructions for future reference. Pass

them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and condenser

give off heat and require good ventilation to operate correctly

and save energy.

3. Leave a space of at least 10 cm between the top part of the

appliance and any furniture above it, and at least 5 cm between

the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat (direct

sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the appliance

and the wall behind it, fit the spacers supplied in the installation

kit, following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the refrigerator by

tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it vertically

and wait at least 3 hours before connecting it to the electricity mains.

Before inserting the plug into the electrical socket ensure the following:

• The appliance is earthed and the plug is compliant with the law.

• The socket can withstand the maximum power of the appliance,

which is indicated on the data plate located on the bottom left

side of the fridge (e.g. 150 W).

• The voltage must be in the range between the values indicated

on the data plate located on the bottom left side (e.g. 220-240V).

• The socket is compatible with the plug of the appliance. If the

socket is incompatible with the plug, ask an authorised technician

to replace it (

see Assistance

). Do not use extension cords or

multiple sockets.

! Once the appliance has been installed, the power supply cable

and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by authorised

technicians only (see Assistance).

The manufacturer declines any liability should these safety The manufacturer declines any liability should these safety

The manufacturer declines any liability should these safety

measures not be observed.measures not be observed.

measures not be observed.

Start-up and use

Starting the appliance

! Before starting the appliance, follow the installation

instructions (

see Installation

! Before connecting the appliance, clean the compartments and

accessories well with lukewarm water and bicarbonate.

! The appliance comes with a motor protection control system which

makes the compressor start approximately 8 minutes after being

switched on. The compressor also starts each time the power supply

is cut off whether voluntarily or involuntarily (blackout).

1. Set the FREEZER OPERATION knob on

2. Insert the plug into the socket and ensure that the green POWER

indicator light illuminates.

3. Turn the FREEZER OPERATION knob to an average value and

press the SUPER FREEZE button (rapid freezing): the SUPER

FREEZE indicator light will illuminate. Once the refrigerator has

reached the optimal temperature, the indicator light goes out and

you can begin food storage.

4. Turn the REFRIGERATOR OPERATION knob to an average value.

After a few hours you will be able to put food in the refrigerator.

Chiller system

No Frost

The No Frost system circulates cold air continuously to collect

humidity and prevent ice and frost formation. The system maintains

an optimal humidity level in the compartment, preserving the original

quality of the food, preventing the food from sticking together and

making defrosting a thing of the past. Do not block the aeration cells

by placing food or containers in direct contact with the refrigerating

back panel. Close bottles and wrap food tightly.

Using the refrigerator to its full potential

• Use the REFRIGERATOR OPERATION knob to adjust the

temperature (

see Description

• Activate the SUPER COOL function to lower the temperature quickly,

for example, when you place a large number of new food items

inside a fridge and the internal temperature rises slightly. This

function quickly cools the groceries by temporarily reducing the

temperature until it reaches the ideal level.

• Place only cold or lukewarm foods in the compartment, never hot

foods (see Precautions and tips).

• Remember that cooked foods do not last longer than raw foods.

• Do not store liquids in open containers: they will increase the

level of humidity in the refrigerator and cause condensation to

form.

SHELVES: with or without grill.

Due to the special guides the shelves are removable and the height

is adjustable (

see diagram

), allowing easy storage of large containers

and food. Height can be adjusted without complete removal of the

shelf.

TEMPERATURE Indicator light*: to identify the coldest area in the

refrigerator.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit BIAA 33 F H Bedienungsanleitung Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kühlschränke Indesit BIAA 33 F H