Indesit OL 1038 LI S RFH Bedienungsanleitung PDF herunterladen (Seite 16)

Sliding rack kit assembly

To assemble the sliding

racks:

1. Remove the two frames,

lifting them away from the

spacers A (see gure).

2. Choose which shelf to use

with the sliding rack. Paying

attention to the direction in

which the sliding rack is to

be extracted, position joint B

and then joint C on the

frame.

3. Secure the two frames

with the guide rails using the

holes provided on the oven

walls (see diagram). The

holes for the left frame are

situated at the top, while the

holes for the right frame are

at the bottom.

4. Finally, t the frames on

the spacers A.

! Do not place the sliding racks in position 5.

Side and rear catalytic liners*

These are panels coated with a special enamel, which is

able to absorb the fat released by food as it cooks.

This enamel is quite strong, so that the various accessories

(racks, dripping pans, etc.) can slide along them without

damaging them. White marks may appear on the surfaces;

these are not a cause for concern.

Nevertheless, the following should be avoided:

- scraping the enamel with sharp objects (a knife, for

example);

- using detergents or abrasive materials.

Left

guide rail

Right guide

rail

Direction

of extraction

* Only available on certain models.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Keine Kommentare

Indesit OL 1038 LI S RFH Bedienungsanleitung Seite 16