Indesit TIP 844 DO L Bedienungsanleitung PDF herunterladen (Seite 19)

Care and maintenance

Switching the appliance off

Disconnect your appliance from the electricity supply

before carrying out any work on it.

Cleaning the appliance

! Do not use abrasive or corrosive detergents

(for example, products in spray cans for cleaning

barbecues and ovens), stain removers, anti-rust

products, powder detergents or sponges with abrasive

surfaces: these may scratch the surface beyond repair.

! Never use steam cleaners or pressure cleaners on the

appliance.

• It is usually sufficient simply to wash the hob using

a damp sponge and dry it with absorbent kitchen

towel.

• If the hob is particularly dirty, rub it with a special

glass ceramic cleaning product, then rinse well and

dry thoroughly.

• To remove more stubborn dirt, use the scraper

provided. Remove spills as soon as possible,

without waiting for the appliance to cool, to avoid

residues forming crusty deposits. You can obtain

excellent results by using a rust-proof steel wire

sponge - specifically designed for glass ceramic

surfaces - soaked in soapy water.

! The scraper provided is sharp: be careful when using

it.

• If any plastic or sugary substances are accidentally

melted on the hob, remove them immediately with

the scraper, while the surface is still hot.

• Once it is clean, the hob may be treated with

a special protective maintenance product: the

invisible film left by this product protects the surface

from drips during cooking. This maintenance task

should be carried out while the appliance is warm

(not hot) or cold.

• Always remember to rinse the appliance well with

clean water and dry it thoroughly: residues can

become encrusted during subsequent cooking

processes.

Stainless steel frame (only in models with outer frame)

Stainless steel can be marked by hard water which has

been left on the surface for a long time, or by cleaning

products containing phosphorus.

After cleaning, it is advisable to rinse the surface well

and dry it thoroughly. If water is spilt on the surface,

dry it quickly and thoroughly.

! Some hobs have an aluminium frame which is

similar to stainless steel. Do not use any cleaning or

degreasing products which are not suitable for use

with aluminium.

Disassembling the hob

If it is necessary to disassemble the hob:

1. Loosen the screws fixing the alignment springs on

each side.

2. Loosen the screws holding the fixing hooks in each

corner.

3. Take the hob out of its installation cavity.

! Do not attempt to repair the appliance yourself. If the

appliance breaks down, contact a Service Centre.

Technical description of the models

The induction system is the quickest existing way

of cooking. Unlike traditional hotplates where the

cooking zone heats up, with the induction system

heat is generated directly inside pans which have

ferromagnetic bases.

Key:

I = single induction cooking zone

B = booster: the power of the cooking zone may be

boosted to 3000 W

* = the maximum power level is limited while the

booster is activated for the relevant rear cooking

zone (see Start-up and use).

Hobs

TIP 744 DO L

TIP 844 DO L

Cooking zone Power (W)

Back Left

I 1400 – 600 if front left*

Back Right

I 2200 – B 3000* - 1600 if front right*

Front Left

I 2200 – B 3000* - 1600 if back left*

Front Right

I 1400 – B 2000* – 600 if back right*

Total power

7200

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit TIP 844 DO L Bedienungsanleitung Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Indesit TIP 844 DO L