Indesit TIP 644 DD L Bedienungsanleitung PDF herunterladen (Seite 10)

direction.

! All the cooking zones may be programmed

simultaneously, for a duration between 1 and 99

minutes.

1. Select the cooking zone using the corresponding

selector button.

2. Adjust the power level of the cooking zone.

3. Press the

programming button. The indicator

light corresponding to the selected zone will start

flashing.

4. Set the cooking duration using the

- and +

buttons.

5. Confirm by pressing the

button or automatic

selection occurs after 10 seconds.

The timer begins counting down immediately. A buzzer

sounds for approximately 1 minute and the cooking

zone switches off when the set programme has

finished.

Repeat the above procedure for each hotplate you

wish to programme.

Using multiple programmes and the display

If one or more hotplates are programmed,

the display will show the data for the

hotplate with the least time remaining, and

the light corresponding to the position of

the hotplate will flash. The lights corresponding to the other

hotplates programmed will be switched on.

To visualise the time remaining for the other programmed

hotplates, press the

button repeatedly: the time

remaining for each hotplate will be shown sequentially

in a clockwise order, starting from the front left

hotplate.

Changing the programme

1. Press the

button repeatedly until the duration you

wish to change is shown.

2. Use the

buttons to set the new duration.

3. Confirm by pressing the

button.

To cancel a programme, follow the above instructions.

At step 2, press the

button: the duration decreases

progressively until it reaches 0 and switches off. The

programme resets and the display exits programming

mode.

Timer

The hob must be switched on.

The timer can be used to set a duration up to 99 minutes.

1. Press the

programming button until the timer

indicator light is illuminated

2. Set the desired duration using the

and

buttons.

3. Confirm by pressing the

button.

The timer begins counting down immediately. When

the time has elapsed, a buzzer will sound (for one

minute).

Control panel lock

When the hob is switched on, it is possible to lock the oven

controls in order to avoid accidental changes being made

to the settings (by children, during cleaning, etc.). Press

the

button to lock the control panel: the indicator

light above the button will switch on.

To use any of the controls (e.g. to stop cooking), you

must switch off this function. Press the

button for a

few moments, the indicator light will switch off and the

lock function will be removed.

Switching off the hob

Press the button to switch off the appliance - do not

rely solely on the pan sensor.

If the control panel lock has been activated, the

controls will continue to be locked even after the hob is

switched on again. In order to switch the hob on again,

you must first remove the lock function.

“Demo” mode

It is possible to set the hob to a demonstration mode where

all the controls work normally but the heating elements do

not switch on. To activate the “demo” mode the hob must

be switched on, with all the hotplates switched off.

• Press and hold the

+ and - buttons simultaneously

for 6 seconds. When the 6 seconds have elapsed,

the ON/OFF and CONTROLS LOCKED indicator

lights will flash for one second. Release the

+ and

- buttons and press the button;

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 79 80

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit TIP 644 DD L Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Indesit TIP 644 DD L