Indesit TIC 740 DD L IT Bedienungsanleitung PDF herunterladen (Seite 11)

SUITABLE

UNSUITABLE

Cast iron

Enamelled steel

Special stainless steel 

Copper, 

Aluminium, Glass, Earthenware, 

Ceramic, non magnetic Stainless steel

In addition, to obtain the best results from your hob:

• Use pans with a thick, flat base in order to fully utilise the

cooking zone.

• Always use pans with a diameter which is large enough

to cover the hotplate fully, in order to use all the available

heat.

• Make sure that the base of the cookware is always clean

and dry, in order to fully utilise and extend the life of both

the cooking zones and the cookware.

• Avoid using the same cookware which has been used

on gas burners: the heat concentration on gas burners

may distort the base of the pan, causing it not to adhere

correctly.

Safety devices

Pan sensor

Each cooking zone is equipped with a pan sensor device.

The hotplate only emits heat when a pan with suitable

measurements for the cooking zone is placed on it. If the

indicator light is flashing, it may indicate:

• An incompatible pan

• A pan whose diameter is too small

• The pan has been removed from the hotplate.

Overheating protection

If the electronic elements overheat, the hob switches off

automatically and

F appears on the display, followed by

a flashing number. When the temperature has reached a

suitable level, this message disappears and the hob may be

used again.

Residual heat indicators

Each cooking zone is equipped with a residual heat

indicator. This indicator signals which cooking zones are still

at a high temperature. If the power display shows

, the

cooking zone is still hot. It is possible, for example, to keep a

dish warm or melt butter or chocolate. As the cooking zone

cools, the power display will show

. The display switches

off when the cooking zone has cooled sufficiently.

Safety switch

The appliance has a safety switch which automatically

switches the cooking zones off after they have been in

operation for a certain amount of time at a particular power

level. When the safety switch has been triggered, the display

shows “0”.

For example: the right rear hotplate is set to 5 and will switch

off after 5 hours of continuous operation, while the front left

hotplate is set to 2 and will switch off after 8 hours.

Buzzer

This can also indicate several irregularities:

• An object (a pan, cutlery, etc.) has been placed on the

control panel for more than 10 seconds.

• Something has been spilt on the control panel.

• A button has been pressed for too long. All of the above

situations may cause the buzzer to sound. Remove the

cause of the malfunction to stop the buzzer. If the cause of

the problem is not removed, the buzzer will keep sounding

and the hob will switch off.

Power level

Maximum operating

time in hours

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit TIC 740 DD L IT Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Indesit TIC 740 DD L IT