GB
7
Start-up and use
! The position of the corresponding gas burner or
electric hotplate* is shown on every knob.
Gas burners
Each burner can be adjusted to one of the following
settings using the corresponding control knob:
• Off
Maximum
Minimum
To light one of the burners, hold a lit match or lighter
near the burner and, at the same time, press down
andturnthecorrespondingknobanti-clockwisetothe
maximumsetting.
Since the burner is fitted with a safety device, the knob
shouldbepressedforapproximately2-3secondsto
allow the automatic device keeping the flame alight to
heat up.
When using models with an ignition button, light the
desired burner pressing down the corresponding knob
as far as possible and turning it anticlockwise towards
themaximumsetting.
!Ifaflameisaccidentallyextinguished,turnoffthe
control knob and wait for at least 1 minute before trying
to relight it.
To switch off the burner, turn the knob in a clockwise
directionuntilitstops(whenreachesthe“•”position).
Practical advice on using the burners
To ensure the burners operate efficiently:
• Useappropriatecookwareforeachburner(see
table)sothattheflamesdonotextendbeyondthe
bottom of the cookware.
• Alwaysusecookwarewithaflatbaseandacover.
• Whenthecontentsofthepanreachboilingpoint,
turn the knob to minimum.
Burner
Rapid (R)
Reduced Rapid (RR)
Semi-Rapid (S)
Auxiliary (A)
Triple Crown (TC)
Ø Cookware Diameter (cm)
24 - 26
24 - 26
16 - 20
10 - 14
24 - 26
To identify the type of burner, refer to the designs in the
section entitled, “Burner and Nozzle Specifications”.
Kommentare zu diesen Handbüchern