Indesit NIC 641 B Bedienungsanleitung PDF herunterladen (Seite 7)

Start-up and use

! The glue applied on the gaskets leaves traces of

grease on the glass. Before using the appliance, we

recommend you remove these with a special non-

abrasive cleaning product. During the first few hours

of use there may be a smell of rubber which will

disappear very quickly.

! A few seconds after the hob is connected to the

electricity supply, a buzzer will sound. The hob may

now be switched on.

! If the - or + button is pressed for an extended

period of time, the display scrolls quickly though the

power levels and timer minutes.

Switching on the hob

To switch the hob on, press and hold the

button

for approximately one second.

Switching on the cooking zones

Each cooking zone is controlled using a selector button

and a power adjustment device consisting of a

double - and + button.

• To begin operating a cooking zone, press the

corresponding control button and set the desired

power level (between 0 and 9) using the buttons -

and +.

Booster function*

The booster function for some of the cooking zones

may be used to shorten heating-up times. It may be

activated by pressing the

Booster

button. The indicator

light directly above the button will illuminate. This

function boosts the power to 2000 W or 3000 W,

depending on the size of the relevant cooking zone.

The booster stops automatically after 4 minutes. While

the booster for one of the cooking zones is active, the

corresponding front or rear cooking zone will operate

at a reduced power level (e.g. if the booster for the

rear left-hand hotplate has been activated, the power

level of the front left-hand hotplate will be reduced).

For further information, please refer to the Technical

description of the models.

Switching off the cooking zones

To switch off a cooking zone, select it using the

corresponding selector button and:

• Press the - button: the power of the cooking zone

will progressively decrease until it is switched off.

Programming the cooking duration

! All the cooking zones may be programmed

simultaneously, for a duration between 1 and 99

minutes.

1. Select the cooking zone using the corresponding

selector button.

2. Adjust the power level of the cooking zone.

3. Press the programming button. The indicator

light corresponding to the selected zone will start

flashing.

4. Set the cooking duration using the - and +

buttons.

5. Confirm by pressing the button or automatic

selection occurs after 10 seconds.

The timer begins counting down immediately. A buzzer

sounds for approximately 1 minute and the cooking

zone switches off when the set programme has

finished.

Repeat the above procedure for each hotplate you

wish to programme.

Using multiple programmes and the display

If one or more hotplates are programmed, the display

will show the data for the hotplate with the least time

remaining, and the light corresponding to the position

of the hotplate will flash. The lights corresponding to

the other hotplates programmed will be switched on.

To visualise the time remaining for the other

programmed hotplates, press the button

repeatedly: the time remaining for each hotplate will be

shown sequentially in a clockwise order,

starting from the front left hotplate.

Changing the programme

1. Press the button repeatedly until the duration

you wish to change is shown.

2. Use the

buttons to set the new duration.

3. Confirm by pressing the button.

* Only available in certain models.

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit NIC 641 B Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Indesit NIC 641 B