Indesit MBL 1912 F (FR)/HA Bedienungsanleitung PDF herunterladen (Seite 17)

1717

Accessories

SHELVES: with or without grill.

Due to the special guides the

shelves are removable and the

height is adjustable (see diagram),

allowing easy storage of large

containers and food. Height can

be adjusted without complete

removal of the shelf.

FRESH BOX

: for fresh meat and fish. Due to the

compartments low temperature (the coldest in the

refrigerator) and to the clear door that provides protection

against oxidation and blackening, food can be stored for

even up to one week. It can also be used for cold meals.

CAN RACK shelf: stores cans

horizontally (see diagram).

Yoghurt, butter or general

containers may also be stored

here.

ODOUR FILTER: Some models

are fitted with a new odour filter

with active carbons, which

ensures better air quality inside

the refrigerator.

The filter is located on the bottom

right-hand side, inside the

ventilation opening.

TEMPERATURE Indicator light: to identify the coldest

area in the refrigerator.

1. Check that OK appears clearly on the indicator light (see

diagram).

2. If the word OK does not appear it means that the

temperature is too high: adjust the REFRIGERATOR

OPERATION knob to a higher position (colder) and wait

approximately 10 hours until the temperature has been

stabilised.

3. Check the indicator light again: if necessary, readjust it

following the initial process. If large quantities of food

have been added or if the refrigerator door has been

opened frequently, it is normal for the indicator not to

show OK. Wait at least 10 hours before adjusting the

REFRIGERATOR OPERATION knob to a higher setting.

ICE tray

The fact that they are situated on the top part of the freezer

drawers ensures greater cleanliness: the ice no longer

comes into contact with the food placed inside the freezer

compartment; furthermore, the dripping of the water during

filling is avoided (a lid to cover up the hole after filling with

water is also provided).

1. Pull out the tray by pushing it up.

Check that the tray is ompletely empty and fill it with

water through the opening provided.

2. Take care not to exceed the level indicated (MAX WATER

LEVEL). Excess water prevents the ice cubes from

dispensing (if this happens, wait for the ice to melt and

empty the tray).

3. Turn the tray 90°: due to the connected compartments

each mould fills with water (see diagram).

4. Close the opening with the lid provided and put the tray

back.

5. When the ice has formed (minimum time approximately 8

hours) knock the tray against a hard surface and wet the

outside so that the ice cubes come loose and take them

out through the opening.

WATER LEVEL

MAX

WATER LEVEL

MAX

WATER LEVEL

MAX

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit MBL 1912 F (FR)/HA Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kühl- und Gefrierschränke Indesit MBL 1912 F (FR)/HA