Indesit ARGD 129 (IT).R Bedienungsanleitung PDF herunterladen (Seite 18)

Running a wash cycle

1. SWITCH THE MACHINE ON. Press the

button; the text WELCOME will appear on the

display and the START/PAUSE indicator light will

flash slowly in a green colour.

2. LOAD THE LAUNDRY. Open the porthole door.

Load the laundry, making sure you do not exceed

the maximum load value indicated in the table of

programmes on the following page.

3. MEASURE OUT THE DETERGENT. Pull out the

detergent dispenser drawer and pour the detergent

into the relevant compartments as described in

"Detergents and laundry".

4. CLOSE THE DOOR.

5. SELECT THE WASH CYCLE. Press one of the

WASH CYCLE SELECTOR buttons to select the

required wash cycle; the name of the wash cycle

will appear on the display. A temperature and spin

speed is set for each wash cycle; these may be

adjusted. The duration of the cycle will appear on

the display.

6. CUSTOMISE THE WASH CYCLE. Use the

relevant buttons:

 Modifying the temperature and/or spin

speed. The machine automatically selects the

maximum temperature and spin speed set for the

selected wash cycle; these values cannot therefore

be increased. The temperature can be decreased

by pressing the

button, until the cold wash

"OFF" setting is reached. The spin speed may be

progressively reduced by pressing the

button,

until it is completely excluded (the "OFF" setting). If

these buttons are pressed again, the maximum

values are restored.

Setting a delayed start.

To set a delayed start for the selected programme,

press the corresponding button repeatedly until the

required delay period has been reached. When this

option is enabled, the

symbol lights up on the

display. To remove the delayed start function press

the button until the text "OFF" appears on the

display.

 Modifying the cycle settings.

 Press the button to enable the function; the

indicator light corresponding to the button will

switch on.

 Press the button again to disable the function;

the indicator light will switch off.

 If the selected function is not compatible with the

programmed wash cycle, the indicator light will

flash and the function will not be activated.

 If the selected function is not compatible with

another function which has been selected

previously, the indicator light corresponding to the

first function selected will flash and only the second

function will be activated; the indicator light

corresponding to the enabled function will remain lit.

 The functions may affect the recommended load

value and/or the duration of the cycle.

7. START THE PROGRAMME. Press the START/

PAUSE button. The corresponding indicator light will

become green, remaining lit in a fixed manner, and

the door will be locked (the DOOR LOCKED

symbol will be on). During the wash cycle, the

name of the phase in progress will appear on the

display. To change a wash cycle while it is in

progress, pause the washing machine using the

START/PAUSE button (the START/PAUSE indicator

light will flash slowly in an orange colour); then

select the desired cycle and press the START/

PAUSE button again.

To open the door while a cycle is in progress, press

the START/PAUSE button; if the DOOR LOCKED

symbol is switched off the door may be

opened. Press the START/PAUSE button again to

restart the wash cycle from the point at which it

was interrupted.

8. THE END OF THE WASH CYCLE. This will be

indicated by the text "END OF CYCLE" on the

display; when the DOOR LOCKED

symbol

switches off the door may be opened. Open the

door, unload the laundry and switch off the

machine.

 If you wish to cancel a cycle which has already

begun, press and hold the

button. The cycle will be

stopped and the machine will switch off.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit ARGD 129 (IT).R Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Waschmaschinen Indesit ARGD 129 (IT).R