Indesit AQ8F 29 U H (EU) /1 Bedienungsanleitung PDF herunterladen (Seite 7)

Wash options

Super Wash

This option offers a high-performance wash due to the

greater quantity of water used in the initial phase of the

cycle, and due to the increased wash cycle duration, is

particularly useful for the

removal of stubborn stains.

It can be used with or

without bleach. If you desire

bleaching, insert the extra

tray compartment (3) into

compartment 1. When

pouring in the bleach, be

careful not to exceed the

max level marked on the

central pivot (see figure).

To bleach laundry without

carrying out a full wash cycle, pour the bleach into the

extra compartment 3, select the "Rinse" cycle

and

activate the "Super Wash" option

 It cannot be used in conjunction with

, , , , ,

, , .

Easy Iron

By selecting this option, the wash and spin cycles will be

modified in order to reduce the formation of creases.

At the end of the cycle the washing machine

drum will rotate slowly; the Easy Iron and START/

PAUSE indicator lights will flash. To end the cycle press

the START/PAUSE button or the Easy Iron button.

For the Silk

wash cycle, the machine will end the

cycle while the laundry is soaking and the Easy

Iron indicator light will flash. To drain the water so that

the laundry may be removed, press the START/PAUSE

button or the Easy Iron button.

 It cannot be used in conjunction with

, , , , .

Time Saver

If you select this option, the wash cycle duration will be

reduced by 30%-50%, depending on the selected cycle,

thereby guaranteeing simultaneous water and energy

saving. Use this cycle for lightly soiled garments.

 It cannot be used in conjunction with

, , , ,

, , , , .

Extra rinse

By selecting this option, the efficiency of the rinse is

increased and optimal residual detergent removal is

guaranteed. It is particularly useful for skin which is

sensitive to detergents. We recommend this option is

used with a full load of washing, or when a large amount

of detergent is required.

 It cannot be used in conjunction with

, , .

(*) The duration of the wash cycles can be checked

on the display.

Wash cycles and options

Table of wash cycles

Icon Description of the wash cycle

Max.

temp.

(°C)

Max.

speed

(rpm)

Detergent and additives

Max.

load

(kg)

Cycle

duration

Pre-

wash

Wash

Fabric

softener

Bleach

Cottons wash cycles

Cottons

with pre-wash

(Add detergent to the relevant compartment).

90° 1200

ll l

- 8

Cottons (1):

heavily soiled whites and resistant colours.

60°

(Max. 90°)

1200 -

ll l

Cottons (1-2):

heavily soiled whites and delicate colours.

40° 1200 -

ll l

Coloured

Cottons (3)

40° 1200 -

ll l

Shirts

40° 600 -

ll l

Jeans

40° 800

- 4

Special programmes

Baby:

heavily soiled delicate colours

40° 800 -

ll l

Durable

Synthetics

60° 800 -

ll l

Delicate

Synthetics

40° 800 -

ll l

"Bed & Bath"

for bedlinen and towels.

60° 1200 -

ll l

Duvets:

for down-stuffed garments.

30° 1000 -

- 3,5

Silk:

for garments in silk and viscose, lingerie.

30° 0 -

- 2

Wool:

for wool, cashmere, etc.

40° 600 -

- 2

Mix 30':

to refresh lightly soiled garments quickly (not suitable for

wool, silk and clothes which require washing by hand)

30° 800 -

- 3,5

Partials wash cycles

Rinse - 1200 - -

Spin - 1200 - - - - 8

Drain - 0 - - - - 8

For all Test Institutes:

1) Test wash cycle in compliance with regulation 2010/1061: set wash cycle

with a temperature of 60°C and 40°C.

2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.

3) Short wash cycle for cottons: set wash cycle

with a temperature of 40°C.

1) Test wash cycle in compliance with regulation EN 60456: set wash cycle with a temperature of 60°C .

The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as

water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.

CH RU TR

(*) Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this value will then be shown on the display.