Indesit KT6G2M Bedienungsanleitung PDF herunterladen (Seite 6)

The hotplate lid is fitted with a safety device which cuts off the gas supply to the

hotplate burners unless the lid is fully open. Do not use the safety device as a means of

controlling the hotplate burners.

The hotplate has one high speed burner, two normal simmering burners and one small

simmering burner which will accommodate pans between 120mm (4

/4") and 260mm

(10

") diameter. All pans should be positioned centrally over the burners.

When using small pans over small or medium hotplate burners better stability can be

achieved by using the pan support trivet.

TO USE THE HOTPLATE

1. Remove any items or spillage from the top of the lid and then raise it to its

fully open position.

2. Press the ignition button and then push in and turn the control knob of the

chosen burner anti-clockwise to the large flame symbol. Continue to push in

the knob until the sparks light the gas.

3. Turn the control knob anti-clockwise to reduce the heat input.

Only turn the control knob between the large flame symbol and the small

flame symbol when adjusting the setting.

4. To turn off, turn the control knob fully clockwise to the symbol O.

DO NOT use the hotplate unless all pan supports are in position.

DO NOT use mis-shapen pans which may be unstable.

DO NOT use round base woks directly on the pan supports.

DO NOT use the glass lid as a working surface.

Each burner is fitted with a spark ignitor for lighting the gas. To ensure rapid lighting of

the burners every time they are used, the ignitors must be kept clean and dry. Remove

any food spillage or cleaning materials from the ignitor using a small nylon brush such

as a tooth brush. Access to the ignitor can be achieved by lifting off the loose burner

parts carefully when the burners are cool.

When the hotplate burner bodies and caps are removed for cleaning, be careful not to

drop any food particles or cleaning materials into the burner bases, to avoid the

possibility of blocking the gas jets.

If aluminium based pans are used, a silvery deposit may appear on the top edge of the

pan support fingers. See ‘Care and Cleaning’ section for cleaning information.

Hotplate

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Keine Kommentare

Indesit KT6G2M Bedienungsanleitung Seite 6