Indesit IN F 140 UK Bedienungsanleitung PDF herunterladen (Seite 3)

ATTENTION

Read your handbook carefully since it contains instructions

which will ensure safe installation, use and maintenance of

your appliance.

Your freezer is built to International standards (EN60) and

has been awarded the European approval mark (IMQ) for

compliance to UK electrical safety requirements. It also meets

the EC standards on the prevention and elimination of radio

interference (EC directive 87/308 - 02.06.89).

1. This appliance is designed to be used indoors and under

no circumstances should it be installed outside.

2. The appliance should be used only by adults exclusively for

storing foodstuffs in compliance with the instructions provided

in the handbook. Under no circumstances should children be

allowed to operate, or tamper with, this product.

3. For electrical safety, do not attempt to operate this appli-

ance with wet hands or feet.

4. Do not operate this appliance connected to an extension

lead. If a longer supply cable is required, this must be replaced

with one of the same specifications in compliance with the

current electrical regulations. This operation should be carried

out by a qualified person. Ensure that the cable is not trapped

or damaged during the installation.

5. Never pull the cable or the appliance to remove the plug

from the socket.

Safety a good habit to get into

6. Do not touch the internal cooling elements, especially if your

hands are wet, since you could burn or hurt yourself. Do not

eat ice cubes straight out of the freezer.

7. Before doing any cleaning, disconnect the appliance from

the electricity (by pulling out the plug orturning off the general

switch in your home).

8. Before disposing of your old appliance, remember to break

or remove the lock as a safety measure to protect children who

might lock themselves inside the appliance when playing.

9. If your appliance is not operating properly, before calling your

after-sales service read the chapter on “Trouble Shooting” which

might help you resolve the problem. Do not attempt to repair

the fault by intervening on the internal components.

10. If the power supply cord must be replaced, please contact

one of our Customer Service Centers. In some cases, the con-

nections are made using special terminals and in others a spe-

cial tool must be used to access the connections.

11. Do not use electric appliances inside the compartment for

food storage, if these are not those recommended by the

manufacturer.

12. At the end of the functional life of your appliance –

containing cyclopentane gas in the insulation foam and perhaps

gas R600a (isobutane) in the refrigeration circuit – the latter

should made safe before being sent to the dump. For this

operation, please contact your dealer or the Local Organisation

in charge of waste disposal.

Installation

To ensure that the appliance operates properly and to

reduce energy consumption, it is important that the

appliance is installed correctly.

Ventilation

The compressor and condenser generate heat and, there-

fore, need to be ventilated properly. Rooms with less than

perfect ventilation are not very suited for installation of the

appliance. Therefore, it should be installed in a room with

an opening (window or French window) that provide the

appropriate amount of air re-circulation. It is also important

that the room not be too humid.

During installation, make sure not to cover or obstruct the

grates that allow for proper ventilation of the appliance.

Away from Heat

Avoid positioning the appliance in a place where it is directly

exposed to sunlight or near an oven, cook top or the like.

Electrical Connection and Earthing

Before proceeding with the electrical connection, make sure

that the voltage indicated on the rating plate, located within

the freezer, corresponds to the mains voltage in your home

and that the socket is fitted with a standard earthing wire in

accordance with safety standards for 46/90 systems. If the

socket is not fitted with an earthing wire, the manufacturer

will not be held liability for any damages and or injuries aris-

ing out of the use of the appliance. Do not use multiple

sockets or adapters.

Position the appliance in such a way that you can access

the socket where it is plugged in.

Insufficient power?

The electrical socket must be able to handle the maximum

power load of the appliance, which is indicated on the rating

plate located at the bottom left next to the vegetable crisper.

Before making the electrical connection ...

After the appliance has been delivered, place it in the verti-

cal upright position and wait at least 3 hours before insert-

ing the plug into the socket in order to ensure that it func-

tions properly.

For English Market only

The appliance is fitted with a continental 2-èin plug for fac-

tory testing. Before installation the plug should be cut off.

The appliance is designed to be installed in a switched spur

outlet fused at 13 Ampere. If the installation requires a 13

Ampere plug type to be fitted it should be conform to BSI

1363.

1 2 3 4 5 6 7 8 ... 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit IN F 140 UK Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gefrierschränke Indesit IN F 140 UK