Indesit TEPPAN YAKI F Bedienungsanleitung PDF herunterladen (Seite 10)

Installation

 Please keep this instruction booklet in a safe place for

future reference. If the appliance is sold, given away or

moved, please sure

the booklet is also passed on to the

new owners so that they may benefit from the advice

contained within it.

 Please read this manual car

efully: it contains important

information concerning the safe operation, installation

and maintenance of the appliance.

Positioning

 Keep all packaging material out of reach of children. It

may present a choking or suffocation hazard (see

Precautions and tips).

 The appliance must be installed by

a qualified

professional in accordance with the instructions

provided. Incorrect installation may damage property or

cause harm to people

or animals.

Built-in appliance

Use an appropriate cabinet to ensure that the appliance

operates properly:

 the supporting surface must be heat-resistant up to a

temperature of a

pproximately 100°C;

 avoid installing the hob above a dishwasher: if this

cannot be avoided, place a waterproof separation

device between the two appliances;

 depending on the hob you want to install (see figure),

the cabinet must have the following dimensions:

Installing semi-flush ho bs (TEPPAN YAKI SF)

All the necessary precautions must be taken in order

to install the appliance in conformity with current

accident-prevention regulations (CEI-UNI-CIG)

relating to gas and electrical connections. To ensure

sit-on hobs installed in kitchen cabinets operate

correctly, the minimum distances indicated should

be observed (see figure). All adjacent surfaces and

the back panel should also be able to withstand an

overheating temperature of 65°C.

Securing the appliance to the c

abinet

The appliance must be installed on a perfectly level

supporting surface.

Any deformities caused by improper fixing could

alter the features and the operation of the hob.

 Before fitting the hob to the worktop, position the

seal provided along the perimeter of the hob, as

illustrated in the figure.

 The installation cavity should have the dimensions

indicated in the figure accompanying the previous

paragraph.

Fix the hob as follows:

1. Use the screws supplied to fit the 4 alignment

springs in the holes provided at the central point of

each side of the part underneath the hob.

2. Place the hob in the cavity, make sure it is in a

central position and push down on the whole

perimeter until the hob adheres well to the

supporting surface.

 The screws for the alignment springs must remain

accessible.

 In order to adhere to safety standards, the

appliance must not come into contact with electrical

parts once it has been installed.

TEPPAN YAKI SF

460

510

495

445

50 min

700 min

50 min

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit TEPPAN YAKI F Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern