Indesit ARTF 104 (EU) Bedienungsanleitung PDF herunterladen (Seite 2)

Installation

! Keep this instruction manual in a safe place for future

reference. Should the appliance be sold, transferred or

moved, make sure the instruction manual accompanies

the washing machine to inform the new owner as to its

operation and features.

! Read these instructions carefully: they contain vital infor-

mation on installation, use and safety.

Unpacking and levelling

Unpacking

1. Unpack the washing

machine.

2. Check whether the wa-

shing machine has been

damaged during transport. If

this is the case, do not install

it and contact your retailer.

3. Remove the four protec-

tive screws and the rubber

washer with the respective

spacer, situated on the rear

of the appliance (see figure).

4. Seal the gaps using the

plastic plugs provided.

5. Keep all the parts: you

will need them again if the

washing machine needs to be moved to another location.

Warning: should the screws be re-used, make sure you fasten

the shorter ones at the top.

! Packaging materials are not children’s toys.

Levelling

Your machine may make a considerable amount of noise if

the two front feet have not been adjusted correctly.

1. Install the washing machine on

a flat sturdy floor, without resting

it up against walls, furniture cabi-

nets or other.

2. If the floor is not perfectly

level, compensate for any

unevenness by tightening or

loosening the adjustable front

feet (see figure); the angle of

inclination, measured according

to the worktop, must not exceed 2°.

Levelling your appliance correctly will provide it with sta-

bility and avoid any vibrations, noise and shifting during

operation. If it is placed on a fitted or loose carpet, adjust

the feet in such a way as to allow enough room for ventila-

tion beneath the washing machine.

Electric and water connections

Connecting the water inlet hose

1. Connect the supply pipe

by screwing it to a cold water

tab using a ¾ gas threaded

connection (see figure).

Before performing the con-

nection, allow the water to

run freely until it is perfectly

clear.

2. Connect the other end of

the water inlet hose to the

washing machine, screwing

it onto the appliance’s cold

water inlet, situated on the top

right-hand side on the rear of

the appliance (see figure).

3. Make sure there are no

kinks or bends in the hose.

! The water pressure at the tap must be within the values

indicated in the Technical details table (on the next page).

! If the water inlet hose is not long enough, contact a spe-

cialist store or an authorised serviceman.

1 2 3 4 5 6 7 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit ARTF 104 (EU) Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Waschmaschinen Indesit ARTF 104 (EU)