Indesit AQ9D 692 U (EU)/VA Bedienungsanleitung PDF herunterladen (Seite 7)

Wash options

Steam Hygiene

This option enhances washing performance by generating

steam during the wash cycle that eliminates any bacteria

from fibres while treating them at the same time. Place the

laundry in the drum, choose a compatible programme and

select option “

“.

! The steam generated during washing machine operation

may cause the porthole door to become hazy.

! It cannot be used in conjunction with

, (90°C), , ,

, , , , , , , .

Easy Iron

By selecting this option, the wash and spin cycles will be

modified in order to reduce the formation of creases.

At the end of the cycle the washing machine drum will

rotate slowly; the “Easy Iron” and START/PAUSE indicator

lights will flash. To end the cycle press the START/PAUSE

button or the “Easy Iron” button. For the Silk

wash

cycle, the machine will end the cycle while the laundry is

soaking and the “Easy Iron” indicator light will flash.

To drain the water so that the laundry may be removed,

press the START/PAUSE button or the “Easy Iron” button.

! It cannot be used in conjunction with

, , , , , .

Time Saver

If you select this option, the wash cycle duration will be

reduced by 30%-50%, depending on the selected cycle,

thereby guaranteeing simultaneous water and energy

saving. Use this cycle for lightly soiled garments.

! It cannot be used in conjunction with

, , , , ,

, , , , .

Extra rinse

By selecting this option, the efficiency of the rinse is

increased and optimal residual detergent removal is

guaranteed. It is particularly useful for skin which is

sensitive to detergents. We recommend this option is used

with a full load of washing, or when a large amount of

detergent is required.

! It cannot be used in conjunction with

, , , .

(*) Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this

value will then be shown on the display.

Wash cycles and options

Table of wash cycles

For all Test Institutes:

1) Test wash cycle in compliance with regulation EN 60456: set wash cycle with a temperature of 60°C.

2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.

3) Short wash cycle for cottons: set wash cycle with a temperature of 40°C.

Icon Description of the wash cycle

Max. temp.

(°C)

Max.

speed

(rpm)

Detergent and additives

Max.

load

(kg)

Cycle

duration

Deter-

gent for

prewash

Deter-

gent for

wash

Fabric

softener

Cottons wash cycles

Cottons with pre-wash

(Add detergent to the relevant compartment).

90° 1600

  

Cotton (1): heavily soiled whites and resistant colours.

60°

(Max. 90°C)

1600 -

 

Cotton (2): heavily soiled whites and delicate colours. 40° 1600 -

 

Coloured Cotton (3) 40° 1600 -

 

Shirts

40° 600 -

 

Jeans

40° 800 -

 

Special programmes

Baby: heavily soiled delicate colours 40° 800 -

 

Durable Synthetics 60° 800 -

 

** Steam Refresh (see next page). - - - - - 1,5

"Bed & Bath"" for bedlinen and towels. 60° 1600 -

 

Duvets: for down-stuffed garments. 30° 1200 -

 

3,5

Silk: for garments in silk and viscose, lingerie. 30° 0 -

 

Wool: for wool, cashmere, etc. 40° 600 -

 

Mix 30': to refresh lightly soiled garments quickly (not suitable

for wool, silk and clothes which require washing by hand)

30° 800 -

 

3,5

Partials wash cycles

Rinse - 1600 - -



Spin - 1600 - - - 9

Drain - 0 - - - 9

(*) The duration of the wash cycles can be checked on the display.

The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as

water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.