Indesit XWA-71483X-W-DE Bedienungsanleitung PDF herunterladen (Seite 14)

Installation

! This instruction manual should be kept in a safe

place for future reference. If the washing machine

is sold, transferred or moved, make sure that the

instruction manual remains with the machine so

that the new owner is able to familiarise himself/

herself with its operation and features.

! Read these instructions carefully: they contain

vital information relating to the safe installation

and operation of the appliance.

Unpacking and levelling

Unpacking

1. Remove the washing machine from its packaging.

2. Make sure that the washing machine has

not been damaged during the transportation

process. If it has been damaged, contact the

retailer and do not proceed any further with the

installation process.

3. Remove the 4 pro-

tective screws (used

during transportation)

and the rubber washer

with the corresponding

spacer, located on the

rear part of the applian-

ce (see figure).

4. Close off the holes using the plastic plugs

provided.

5. Keep all the parts in a safe place: you will need

them again if the washing machine needs to be

moved to another location.

! Packaging materials should not be used as

toys for children.

Levelling

1. Install the washing machine on a flat sturdy

floor, without resting it up against walls, furniture

cabinets or anything else.

2. If the floor is not per-

fectly level, compensa-

te for any unevenness

by tightening or loo-

sening the adjustable

front feet (see figure);

the angle of inclination,

measured in relation to

the worktop, must not

exceed 2°.

Levelling the machine

correctly will provide it with stability, help to avoid

vibrations and excessive noise and prevent it

from shifting while it is operating. If it is placed on

carpet or a rug, adjust the feet in such a way as

to allow a sufficient ventilation space underneath

the washing machine.

Connecting the electricity and wa-

ter supplies

Connecting the water inlet hose

1. Connect the “Water

Block” (A) device to a

cold water tap using

a 3/4 gas threaded

attachment, then per-

form the connection

by screwing the supply

hose to the device.

Before performing the

connection, allow the

water to run freely until it is perfectly clear.

For a correct installation of the device, fol-

low the instructions given in the “Water Block”

packaging.

! The device is already adjusted for the correct

operation of the washing machine and therefore

it is recommended not to change its settings.

2. Connect the inlet

hose to the washing

machine by screwing

it onto the correspon-

ding water inlet of the

appliance, which is si-

tuated on the top right-

hand side of the rear

part of the appliance

(see figure).

3. Make sure that the hose is not folded over

or bent.

! The water pressure at the tap must fall within

the values indicated in the Technical details table

(see next page).

! If the inlet hose is not long enough, contact a

specialised shop or an authorised technician.

! Never use second-hand hoses.

! Use the ones supplied with the machine.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit XWA-71483X-W-DE Bedienungsanleitung Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Waschmaschinen Indesit XWA-71483X-W-DE