Indesit SL M07 A3M O Bedienungsanleitung Seite 14

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 84
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 13
1414
en
DESCRIPTION OF THE VACUUM
CLEANER
1. Multi brush*
2. Bristle-adjustment pedal
3. Deluxe parquet brush*
4. Parquet brush*
5. Upholstery brush*
6. Nozzle for delicate surfaces*
7. Clamp*
8. Precision nozzle*
9. Metal extension lower pipe
10. Pipe length regulator
11. Metal extension upper pipe
12. Hose handle
13. Air regulator
14. Remote Power control*
15. Handle grip
16. Plastic exible hose
17. Release
18. Suction inlet
19. Dustbin lid
INTRODUCTION
Thank you for purchasing our Multicyclonic
vacuum cleaner. In doing so you have opted
for an effective, high performance appliance.
We advise you to register this product on
www.hotpoint.co.uk to make sure you are
entitled to all the benets made available by
Hotpoint Customer Service.
The multicyclonic vacuum is designed combining
efciency and functionality. The new high efciency motors
ensure optimal performances with low consumption.
BEFORE FIRST USE
Assembling (A, B)
1. Fasten the plastic exible hose (16) to the suction
inlet (18) until it clicks into place. To remove it,
press the release (17) and pull it out.
2. Fit the metal extension upper pipe (11) into the
hose handle (12) until it locks into place. Use the
pipe length regulator (10) to adjust the length of
the pipe.
3. Fit the attachment you need (see chapter
“Attachments”) into the end of the metal
extension pipe until it locks into place.
If your appliance is equipped with a Remote Power
Control, you will need to insert the batteries supplied
20. Lower multicyclone
21. Dustbin container
22. Upper multicyclone
23. Dustbin handle
24. Button + for electronic power adjustment*
25. Button - for electronic power adjustment*
26. Standby button*
27. Battery compartment*
28. Dustbin full indicator*
29. Filter cleaning indicator*
30. Standby indicator*
31. Electronic power regulator*
32. Start/Stop button
33. Housing*
34. Cord-rewind button
35. Power cord
36. Dustbin release button
37. Multicyclonic lter
38. Hepa 14 lter
39. Air grill
40. Sponge
* on some models only
(27) (see paragraph “Remote Power Control” under
chapter “Features”).
USING THE VACUUM CLEANER
Do not use the vacuum cleaner without lters or dust
container, as the appliance could get damaged.
1. Unwind the power cord (35) and plug the
appliance into an electrical outlet (220/240V).
We suggest to unwind the entire power cord before
starting the appliance.
2. Press the start/stop button (32) to start the
appliance (D).
3. The suction power is set on maximum intensity
by default, to select the desired suction intensity
(based on the model) use the +/- button and
electronically adjust the power (24, 25) of the
Remote Power Control; or manually push the
electronic power regulator (31).
We suggest to use a low suction power on delicate
surfaces such as curtains, fabrics, cushions etc to
avoid any damage; or at least open the air regulator
(13) to reduce the suction effect.
4. To pause the vacuum cleaner, if this feature is
available, you can use the standby button (26) on
the Remote Power Control or the Start&Pause
function (based on the model). Just insert the
brush into its housing (33).
5. To switch off the appliance press the start/stop
button (32) again.
Seitenansicht 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare