Indesit TCL 831 XB (FR) Bedienungsanleitung Seite 19

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 28
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 18
GB
19
Dryer Description
The Progress or Delay lights show you the status of
the programme, or the delay time when they flash.
During a delayed start the lights flash to show the
delay selected. When (not flashing) they show each
stage of the programme by the corresponding light
turning on (see Start and Programmes).
The Empty Water indicator light (Bac Plein) signals
that the water container should be emptied. The light
will take a few seconds to go out after replacing the
empty water container, the dryer must be running for this
to happen (see The Controls).
Note: If the water bottle fills the indicator light flashes, the
heat is turned off and your clothes will not dry.
The Clean Filter light (Filtre à Nettoyer) gives you a
reminder before every programme that it is essential
to clean the filter every time the dryer is used (see
Maintenance and Care).
The Clean Condenser light (Condenseur à Nettoyer)
gives you a reminder that it is essential to clean the
condenser at regular intervals (see Maintenance and
Care).
The ON/OFF button : If the dryer is running and
this button is pressed, the dryer stops. Press again,
the dryer restarts.
The Drying Guide allows you to consult a user friendly
table of fabric types and load capacities.
The PROGRAMMES knob sets the programme: rotate
it until the indicator is pointing to the programme you want
to select (see Start and Programmes).
The OPTION buttons/lights select available options for
your selected programme. The lights indicate that the
option has been selected (see Start and Programmes).
The START/PAUSE button/light (Départ/Pause)
starts a selected programme. When you press this
button there will be one beep and the progress lights
will flash to confirm the action. When a programme is
running, holding this button in pauses the programme
and stops the dryer. The light is green when programme
is running, flashing amber if the programme has been
paused or flashing green if on standby waiting to start
a programme (see Start and Programmes).
Control panel
Empty Water
Light
Drying Guide
PROGRAMMES
Knob
START/PAUSE
Button & Light
Indicator
Progress or Delay
Lights
OPTION
Buttons & Lights
Clean Filter
Light
Clean Condenser
Light
ON/OFF
Button
To open the door The features
Water container
Air intake
grille
Rating plate
Filter
Model &
Serial
numbers
Condenser cover handle
(Pull to open)
Condenser cover
Press and release the front
panel in position shown
Condenser unit
(Cover open)
Seitenansicht 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare