Indesit PBAA 33 F D Bedienungsanleitung Seite 22

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 52
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 21
22
GB
Chiller system
No Frost
The No Frost system circulates cold air continuously to collect humidity
and prevent ice and frost formation. The system maintains an optimal
humidity level in the compartment, preserving the original quality of
the food, preventing the food from sticking together and making
defrosting a thing of the past. Do not block the aeration cells by
placing food or containers in direct contact with the refrigerating back
panel. Close bottles and wrap food tightly.
Using the refrigerator to its full potential
Adjust the temperature using the display.
Activate the SUPER COOL function to lower the temperature quickly,
for example, when you place a large number of new food items
inside a fridge and the internal temperature rises slightly. This
function quickly cools the groceries by temporarily reducing the
temperature until it reaches the ideal level.
Place only cold or lukewarm foods in the compartment, never hot
foods (see Precautions and tips).
Remember that cooked foods do not last longer than raw foods.
Do not store liquids in open containers: they will increase the level
of humidity in the refrigerator and cause condensation to form.
SHELVES: with or without grill.
Due to the special guides the shelves are removable and the height is
adjustable (
see diagram
), allowing easy storage of large containers and
food. Height can be adjusted without complete removal of the shelf.
TEMPERATURE Indicator light*: to identify the coldest area in the
refrigerator.
1. Check that OK appears clearly on the indicator light (
see diagram
).
2. If the word “OK” does not appear it means that the temperature is
too high: adjust the REFRIGERATOR OPERATION knob to a higher
position (colder) and wait approximately 10 hours until the
temperature has been stabilised.
3. Check the indicator light again: if necessary, readjust it following
the initial process. If large quantities of food have been added or if
the refrigerator door has been opened frequently, it is normal for
the indicator not to show OK. Wait at least 10 hours before adjusting
the REFRIGERATOR OPERATION knob to a higher setting.
FRESH BOX
*
This is the new box to keep meat, fish and cheese fresh.
When
positioned in the “lower” part of the fridge compartment, it is ideal for
meat and fish; when moved to the “top” part of the fridge, it is perfect
for cheese.
It can be taken out of the fridge when it is not needed.
Using the freezer to its full potential
Adjust the temperature using the display.
Fresh food that needs to be frozen must not come into contact with
food that has already been defrosted. Fresh food must be stored
in the top FREEZER and STORAGE compartment where the
temperature drops below -18°C and guarantees rapid freezing.
To freeze fresh food in the best and safest way possible, activate
the SUPER FREEZE function 24 hours before placing the food
in the freezer. After placing the food inside, activate the SUPER
FREEZE function again; it will be deactivated automatically after
24 hours.
Do not re-freeze food that is defrosting or that has already been
defrosted. These foods must be cooked and eaten (within 24
hours).
Do not place glass bottles which contain liquids, and which are
corked or hermetically sealed in the freezer because they could
break.
The maximum quantity of food that may be frozen daily is indicated
on the plate containing the technical properties located on the
bottom left side of the refrigerator compartment (for example: Kg/
24h: 4).
! Do not open the door during freezing.
! If there is a power cut or malfunction, do not open the freezer door.
This will help maintain the temperature inside the freezer, ensuring
that foods are conserved for at least 9 -14 hours.
! to avoid blocking the air circulation inside the freezer compartment,
it is advisable not to obstruct the ventilation holes with food or
containers.
Ice
3
ice tray
The fact that they are situated on the top part of the freezer drawers
ensures greater cleanliness: the ice no longer comes into contact with
the food placed inside the freezer compartment; furthermore, the
dripping of the water during filling is avoided (a lid to cover up the hole
after filling with water is also provided).
1. Pull out the tray by pushing it up. Check that the tray is ompletely
empty and fill it with water through the opening provided.
2. Take care not to exceed the level indicated (MAX WATER LEVEL).
Excess water prevents the ice cubes from dispensing (if this
happens, wait for the ice to melt and empty the tray).
3. Turn the tray 90°: due to the connected compartments each mould
fills with water (
see diagram
).
4. Close the opening with the lid provided and put the tray back,
placing the top part in the corresponding housing and allowing it to
drop in again.
5. When the ice has formed (minimum time approximately 8 hours)
knock the tray against a hard surface and wet the outside so that
the ice cubes come loose and take them out through the opening.
* Varies by number and/or position, available only on certain models.
Seitenansicht 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare