Indesit SV70DPTAB Bedienungsanleitung PDF herunterladen (Seite 21)

Automatic cleaning using the

PYROLYTIC cycle

During the PYROLYTIC cycle, the internal

temperature of the oven reaches 500°C. The

pyrolytic cycle is activated and burns away food

and grime residues. Dirt is literally incinerated.

Keep children away from the appliance during the

automatic cleaning cycle as surfaces may become

very hot. Particles may ignite inside the oven as a

result of the combustion process. There is no cause

for concern: this process is both normal and hazard-

free.

! The oven advises the user when it is necessary to

perform a cleaning cycle; the display shows the text

"PYROLYTIC recommended - START?"; select "yes"

to set the desired cleaning cycle level.

Before initiating the PYROLYTIC cycle:

! We recommend the duration of the first automatic

cleaning cycle is set to 120 minutes.

! The oven should be cold. If the oven is too hot, the

pyrolytic cycle may not start. Wait for the oven to

cool down.

• remove large or coarse food residues from the

inside of the oven using a damp sponge. Do not

use detergents;

• remove all the accessories, the guide rails and the

supporting frames;

• do not place tea towels or pot holders over the

oven handle.

! The programme may only be started once the oven

door has been closed.

! If the divider is inside the oven, the pyrolytic cycle

will not start.

To activate the PYROLYTIC cycle, press the

button followed by the "MENU" button.

1. Select the PYROLYTIC command and press "OK".

2. Select the desired PYROLYTIC cycle level by

adjusting the

or buttons. The PYROLYTIC cycle

has three default time settings which cannot be

modified:

1. Economy (ECO): duration 1 hour

2. Normal (NOR): duration 1 hour and 30 minutes

3. Intensive (INT): duration 2 hours.

Press the "OK" button to confirm.

Press the "START/STOP" button to begin the

PYROLYTIC cycle.

Safety devices

• The door locks automatically after a few minutes;

• if a malfunction occurs, the heating elements will

be switched off;

• once the oven door has been locked, you cannot

change the duration and end time settings.

! Programming is possible only after selecting the

PYROLYTIC cycle mode.

Programming delayed automatic cleaning

1. Press the selector button

; the END COOKING

option will appear on the display.

2. Adjust the value using the

- and + buttons.

3. Press the "OK" button to confirm.

4. Press the "START/STOP" button to activate the

programmed process.

5. When the cooking time has elapsed, a buzzer

sounds and the oven switches off.

• For example: it is 9:00 a.m. and the Economy

PYROLYTIC cycle has been selected: default set

time 1 hour. 12:30 is scheduled as the end time.

The programme will start automatically at 11:30

a.m.

The message WAITING shows that a programme

has been scheduled. The display shows the

pyrolytic cycle end time and duration alternately.

To cancel programming, switch the oven off

Once the automatic cleaning cycle is over

You will have to wait until the temperature inside the

oven has cooled down sufficiently before you can

open the oven door. You will notice some white dust

deposits on the bottom and the sides of your oven;

remove these deposits with a damp sponge once

the oven has cooled down completely. Alternatively,

you can make use of the already heated oven, in

which case it is not necessary to remove the

deposits, they are completely harmless and will not

affect your food in any way.

1 2 ... 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit SV70DPTAB Bedienungsanleitung Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Indesit SV70DPTAB