Indesit H 61.1 IX Bedienungsanleitung PDF herunterladen (Seite 15)

Electrical connections

The cooker must be connected to the mains electricity

supply. It is designed to operate with alternating

current at the voltage and frequency indicated on the

data plate (see the following page).

The hob is connected to the cooker using a special

connector.

Fitting the power supply cable

1. Open the terminal

board by inserting a

screwdriver into the side

tabs of the cover. Use

the screwdriver as a

lever by pushing it down

to open the cover (see

diagram).

2. Install the power supply cable by loosening the

cable clamp screw and the wire contact screws L-N-

. Connect the wires to the corresponding terminals:

the Blue wire to the terminal marked (N), the Brown

wire to the terminal marked (L) and the Yellow Green

wire to the terminal marked

The terminal board is designed for a 400 V three-

phase connection (see diagrams below).

400V 3N~H05RR-F

5x2.5 CEI-UNEL 35363

If the electrical system has other characteristics (see

diagrams below), carry out the electrical connection

using the connection supports provided in the box P.

230V 1N~H07RN-F 3x4

CEI-UNEL 35364

400V 2N~H05RR-F

4x2.5 CEI-UNEL 35363

3. Secure the power supply cable by fastening the

clamp screw.

4. Close the cover of the terminal board.

BUILT-IN HOB

BUILT-IN COOKER

WHITE RED YELLOWBLUE GREEN

Only on

certain models

NL3L1L2

NL2L1

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit H 61.1 IX Bedienungsanleitung Seite 15

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Indesit H 61.1 IX