Indesit FK 892EJ P 0 X/HA Bedienungsanleitung PDF herunterladen (Seite 29)

Automatic cleaning with the FAST CLEAN function

With the FAST CLEAN mode, the internal temperature of the oven reaches

500°C. The pyrolytic cycle is activated, burning away food and grime

residues. Dirt is literally incinerated.

Keep children away from the appliance during the automatic cleaning cycle

as surfaces may become very hot. Particles may ignite inside the oven as a

result of the combustion process. There is no cause for concern: this process

is both normal and hazard-free.

Before initiating the FAST CLEAN mode:

• clean the oven door;

• remove large or coarse food residues from the inside of the oven using a

damp sponge. Do not use detergents;

• remove all accessories and the sliding rack kit (where present);

• do not place tea towels or pot holders over the oven handle.

! If the oven is too hot, the pyrolytic cycle may not start. Wait for the oven to

cool down.

! The programme may only be started once the oven door has been closed.

To activate the Fast Clean programme:

1. Switch the control panel on by pressing the

button.

2. Press the

, the display will show the text “Piro”, “nor” and the default

duration of 1:30 h (normal cycle) alternately.

3. Press button

, then turn the TIMER knob to adjust the default cleaning

level. There are 3 different levels to choose from, each with a pre-set duration

which cannot be modied:

1. Economy (ECO): turn the knob towards “ ”. Duration 1 hour.

2. Normal (NOR): initial level. Duration 1 hour and 30 minutes.

3. Intensive (INT): turn the knob towards “ ”. Duration 2 hours.

4. Press the

button to conrm.

5. Press the

button to begin the cleaning cycle.

An end time for the FAST CLEAN cycle (as for a normal cooking cycle) may

be programmed (see Programming the automatic cleaning end time).

! The desired Fast Clean mode will be conrmed and started automatically

if the CLOCK icon button is not pressed within 10 seconds from selecting

the cooking time.

Safety devices

• the door locks automatically as soon as the temperature reaches a high

value; the

icon lights up on the display;

• pressing the

button cancels the cleaning cycle t any time;

• if a malfunction occurs, the heating elements will be switched off;

• once the oven door has been locked, you cannot change the duration and

end time settings.

Programming the automatic cleaning end time

1. Press the

button twice: the icon and the numerical digits on the

display will begin to ash.

2. Turn the TIMER knob towards “ ” and “ ” to adjust the cleaning end

time value.

3. Once you have reached the desired end time, press the

button again.

The display will show the duration, the cleaning end time and the set cleaning

level alternately.

4. Press the

button to activate the programmed mode.

Programming has been set when the

and buttons are illuminated.

5. Once cleaning has nished, “END” appears on the display and a buzzer

sounds.

• For example: it is 9:00 a.m. and the Economy (ECO) FAST CLEAN level

has been selected, with the default duration of 1 hour. 12:30 is scheduled

as the end time. The programme will start automatically at 11:30 a.m.

To cancel programming press the

button.

Once the automatic cleaning cycle is over

Before you can open the oven door, you will have to wait for the

icon to

switch off: this indicates the oven temperature has dropped to an acceptable

level. You will notice some white dust deposits on the bottom and the sides

of your oven; remove these deposits with a damp sponge once the oven

has cooled down completely. Alternatively, you can make use of the already

heated oven, in which case it is not necessary to remove the deposits, they

are completely harmless and will not affect your food in any way.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Indesit FK 892EJ P 0 X/HA Bedienungsanleitung Seite 29

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Indesit FK 892EJ P 0 X/HA