Indesit A6V530 (X) EX Bedienungsanleitung Seite 8

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 60
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 7
GB
8
NL3L1L2
400V 3N~
H05RR-F 5x2.5 CEI-UNEL 35363
H05VV-F 5x2.5 CEI-UNEL 35746
1
3
2
4
5
NL2L1
400V 2N~
H05RR-F 4x4 CEI-UNEL 35363
H05VV-F 4x4 CEI-UNEL 35746
1
3
2
4
5
Secure the power supply cable by fastening the cable
clamp screw then put the cover back on.
Connecting the supply cable to the electricity mains
Install a standardised plug corresponding to the load
indicated on the appliance data plate (see Technical data
table).
The appliance must be directly connected to the mains
using an omnipolar switch with a minimum contact opening
of 3 mm installed between the appliance and the mains.
The switch must be suitable for the charge indicated and
must comply with current electrical regulations (the earthing
wire must not be interrupted by the switch). The supply
cable must be positioned so that it does not come into
contact with temperatures higher than 50°C at any point.
Before connecting the appliance to the power supply, make
sure that:
The appliance is earthed and the plug is compliant with the
law.
The socket can withstand the maximum power of the
appliance, which is indicated by the data plate.
The voltage is in the range between the values indicated
on the data plate.
The socket is compatible with the plug of the appliance.
If the socket is incompatible with the plug, ask an
authorised technician to replace it. Do not use extension
cords or multiple sockets.
! Once the appliance has been installed, the power supply
cable and the electrical socket must be easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by
authorised technicians only.
! The manufacturer declines any liability should these
safety measures not be observed.
Data plate, is located inside the flap or, after the oven
compartment has been opened, on the left-hand wall
inside the oven.
IT
TARGHETTA CARATTERISTICHE
Dimensioni
Forno HxLxP
32x43,5x40 cm
Volume
lt. 58
Dimensioni utili
del cassetto
scaldavivande
larghezza cm 42
profondità cm 44
altezza cm 8,5
Tensione e
frequenza
d'alimentazione
vedi targhetta caratteristiche
Piano di cottura
in ceramica
Anteriore sx
Posteriore sx
Posteriore dx
Anteriore dx
Assorbimento
piani di cottura
in ceramica Max
1700 W
1200 W
2300 W
1200 W
6400 W
ENERGY
LABEL
Direttiva 2002/40/CE
sull’etichetta dei forni elettrici.
Norma EN 50304
Consumo energia convezione
Naturale – funzione di
riscaldamento:

Tradizionale;
Consumo energia dichiarazione
Classe convezione Forzata -
funzione di
riscaldamento:

Multicottura.
Questa apparecchiatura è
conforme alle seguenti Direttive
Comunitarie: 73/23/CEE del
19/02/73 (Bassa Tensione) e
successive modificazioni -
89/336/CEE del 03/05/89
(Compatibilità Elettromagnetica)
e successive modificazioni -
93/68/CEE del 22/07/93 e
successive modificazioni.
2002/96/CE
La targhetta caratteristiche e’ situata all’interno della
ribaltina oppure, una volta aperto il cassetto scaldavivande,
sulla parete interna sinistra.
Seitenansicht 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare