Indesit FHS 536 IX/HA S Bedienungsanleitung PDF herunterladen (Seite 25)

Grip the door on the two external sides

and close it approximately half way.Pull the

door towards you lifting it out of its seat (see

diagram).

To replace the door, reverse this sequence.

Inspecting the seals

Check the door seals around the oven regularly. If the seals are damaged,

please contact your nearest Service Centre (see Assistance). We recommend

that the oven is not used until the seals have been replaced.

Replacing the light bulb

To replace the oven light bulb:

1. Remove the glass cover of the

lamp-holder.

2. Remove the light bulb and replace

it with a similar one: Wattage 25 W,

cap E 14.

3. Replace the glass cover (see

diagram).

! Do not use the oven lamp as/for ambient lighting.

Sliding Rack Kit assembly*

To assemble the sliding racks:

1. Loosen the two screws A (see

diagram). If the oven is tted with self-

cleaning panels, these will have to be

temporarily disassembled.

2. Replace the screws A with the

screws and spacers (B + C) supplied

with the kit.

3. Tighten the new screws B and the

corresponding spacers C, tting the

self-cleaning panels on again.

C B

4. Secure the two joints D of the guide

rail in the holes provided on the oven

walls (see diagram). The holes for the

left guide rail are situated at the top,

while the holes for the right one are

at the bottom.

5. Finally, fit the guide rail on the

spacer C.

! Do not place the sliding racks in position 5.

* Only on certain models.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 75 76

Keine Kommentare

Indesit FHS 536 IX/HA S Bedienungsanleitung Seite 25